Download MODEM USER GUIDE Issue RC1.3

file:///C|/MODULAR/Manual.txt
Connection Procedure (To a PC or Terminal)
Complete the following steps to connect your Modem to a
computer, printer or terminal:
1.
Plug the male DB-25 connector on your cable into the
connector marked DTE INTERFACE on the back of your
Modem (Figure 2.1).
2.
Plug the other end of the cable into the V.24
connector on your computer. If you need assistance,
consult the manual which came with your PC or
contact your computer dealer.
Connection Procedure (to telephone line)
Complete the following steps to connect your Modem to your
telephone line:
1.
If you have not yet provided British Telecom PLC
with the information described under BABT
Regulations (refer to chapter 9) please do so at
this time.
2.
Make sure you have one of the British Telecom line
standard jacks (unit 601A).
3.
If you are using your modem without a telephone,
simply plug the modem cable into the wall jack.
4.
If you want to have your telephone connected
alongside your modem, connect the telephone handset
to the socket on the modem's rear panel.
Connection Procedure (for a telephone)
The modem may share a telephone line with a telephone. This
facility is only suitable for simple telephones, and the
connection should be made by plugging the connector on the
telephone line cord into the socket marked 'PHONE' on the
modem's rear panel. Refer to Chapter 9 for points on the use
of this facility.
Connection Procedure (to an AC outlet)
Plug the mains plug into a 220 - 240V AC outlet to complete
the installation.When power has been connected, you should
notice the following :
a)
The MR indicator on the front panel will illuminate.
b)
If your PC is connected and ready to communicate, the TR
indicator will also be lit.
file:///C|/MODULAR/Manual.txt (7 of 102) [12/03/02 11:35:28]