Download "user manual"
Transcript
9. Program 9.1.1. Communications Data Flow The following figure shows the data flow from when the Controller (Serial Communications Unit) issues the serial communications command to the destination device until when the Controller receives the response data from the destination device. 1. Executing the The CPU Unit executes the protocol macro instruction communications sequence (Instruction: ExecPMCR) with the sequence number specified in the program, and loads the communications sequence (protocol macro data) registered in the Serial Communications Unit. ↓ 2. Sending a command The Serial Communications Unit issues the send message (command data) to the destination device based on the sequence number specified in step 1. ↓ 3. Response receive The Serial Communications Unit receives the message processing (response data) from the destination device, and stores it in the specified internal memory of the CPU Unit. 44