Download "user manual"

Transcript
9. Program
9.1.1.
Communications Data Flow
The following figure shows the data flow from when the Controller (Serial Communications
Unit) issues the serial communications command to the destination device until when the
Controller receives the response data from the destination device.
1.
Executing the
The CPU Unit executes the protocol macro instruction
communications sequence
(Instruction: ExecPMCR) with the sequence number
specified in the program, and loads the
communications sequence (protocol macro data)
registered in the Serial Communications Unit.
↓
2.
Sending a command
The Serial Communications Unit issues the send
message (command data) to the destination device
based on the sequence number specified in step 1.
↓
3.
Response receive
The Serial Communications Unit receives the message
processing
(response data) from the destination device, and stores
it in the specified internal memory of the CPU Unit.
44