Download EXEBA-TAMS™ User`s Manual

CHAPTER 5 - ATS Clock
If you have purchased an ATS clock to use with the Exeba
software, you need to read this chapter of the manual. All
the features are available under the ATS Clock submenu.
These features will be enabled once you select the “ATS
Clock” in the Company Setup form.
Features
ü Customize the ATS clock.
ü Customize the standard clock messages and the
employee messages.
ü Download schedules’ data, departments’ data, and
employees’ data to the clock.
ü Poll the transactional data from the clock.
ü Set the time on the clock.
ü Send a command to the clock.
Getting Started
In order for Exeba-TAMSTM to communicate with the clock,
there are different parameters in the software and the clock
that you should configure. Using Exeba-TAMSTM, you
should select the appropriate port and port settings, change
the poll and delay parameters if necessary, then setup the
clock data. Finally, you need to select the clock you want
the software to communicate with.
Exeba-TAMS User’s Guide
90