Download Mapping Guide Appendix - Watershed Management Division

Transcript
Unique Value in Symbology
Change the P1_encroachment line symbols to the Green “P1 encroachment high” and “P1
encroachment low” dotted line symbols.
Delete the “<Heading>” “ENCRCH_IMPACT”
Mapping Slope Decreases
Grade controls and Channel Constrictions Data:
SGAT Feature Type
FIT point
OR
Stream segment – line
data
OR
Stream reach – line data
Stream segment – line
data
Attribute Information
Natural grade control (waterfalls and ledge), human-constructed
grade control (dams and weirs), bridge, or culvert (using different
symbols for each)
Phase 2 data attributing the stream segment line indicating the
number of natural or man-made grade controls (Steps 1.6) and
channel constrictions with deposition above (Steps 4.8) (0 < 2;
>2 < 5; >5)*
Export Code: CNSTR_CNTL
* note: normalized values - # features(5,280)/segment length
Phase 1 data attributing the stream reach line indicating the
number of natural grade controls (Step 3.2) and bridges or
culverts with a high or low impact rating (Step 5.2) (0 < 2; >2 <
5; >5)*
Export Code: CNST_CNTL
* note: normalized values - # features(5,280)/segment length
Phase 2 data (Step 4.9) indicating the number of beaver dams
(0 < 2; >2 < 5; >5)*
Export Code: BVRDAM_RNG
Corridor Planning Map Guidance Appendix
Vermont Agency of Natural
Resources
58
5/28/2010