Download Mapping Guide Appendix - Watershed Management Division
Transcript
Unique Value in Symbology Change the P1_encroachment line symbols to the Green “P1 encroachment high” and “P1 encroachment low” dotted line symbols. Delete the “<Heading>” “ENCRCH_IMPACT” Mapping Slope Decreases Grade controls and Channel Constrictions Data: SGAT Feature Type FIT point OR Stream segment – line data OR Stream reach – line data Stream segment – line data Attribute Information Natural grade control (waterfalls and ledge), human-constructed grade control (dams and weirs), bridge, or culvert (using different symbols for each) Phase 2 data attributing the stream segment line indicating the number of natural or man-made grade controls (Steps 1.6) and channel constrictions with deposition above (Steps 4.8) (0 < 2; >2 < 5; >5)* Export Code: CNSTR_CNTL * note: normalized values - # features(5,280)/segment length Phase 1 data attributing the stream reach line indicating the number of natural grade controls (Step 3.2) and bridges or culverts with a high or low impact rating (Step 5.2) (0 < 2; >2 < 5; >5)* Export Code: CNST_CNTL * note: normalized values - # features(5,280)/segment length Phase 2 data (Step 4.9) indicating the number of beaver dams (0 < 2; >2 < 5; >5)* Export Code: BVRDAM_RNG Corridor Planning Map Guidance Appendix Vermont Agency of Natural Resources 58 5/28/2010