Download C-Bus Universal Remote Control

User’s Guide
To program a manufacturer code for a device, follow these steps:
1) Press and hold the SETUP button on
the touch screen.
2) Press each numbered button (2, 4,
6, 8) until it disappears.
3) Use the arrow buttons on the touch
screen to select CODE, then press
OK.
4) Press a device button (such as TV) to
select the device you want to
modify.
There are two ways to program a manufacturer code:
• manual entry – directly enter the code (go to step 5)
• automatic search – the 5030URC will search known codes (go to
step 9).
Manual Entry
5) Enter the manufacturer code for
your device, provided on the preprogrammed code list.
6) Point the 5030URC at your device
and press the POWER button to test
the code. Your device should switch
on (or off). If not, return to step 5
and try another code.
21