Download C-Bus Universal Remote Control

C-Bus Universal Remote Control
5.0
Creating and Using Macros
5.1
Introduction to Macros
A macro is simply a series of commands. The MACRO feature allows you to
initiate a sequence of up to 60 commands, including time delays, with a
single button. You can create a macro on any control button. Assigning a
macro eliminates a button's original function.
You cannot assign a macro to any of the eight device buttons, the
Page/Date or Backlight/Sleep button, the three function buttons
(SETUP, DELETE, MACRO), or the five Quick Channel buttons.
5.2
Creating a Macro Sequence
The following example helps you better understand how to create a macro
sequence. You can create macros using any sequence of commands.
The example macro is used to:
1) switch on the TV
2) set the TV to video mode
3) switch on the DVD
4) delay two seconds
5) instruct the DVD to play a disc.
Create the macro using the following steps:
1) Press and hold the MACRO button
on the touch screen.
2) Press each numbered button (2, 4,
6, 8) until it disappears.
3) Use the arrow buttons on the touch
screen to select KEY, then press OK.
4) Use the device buttons to select the
device you want to program.
30