Download PMD 180 - Uticor
Transcript
PMD 180 Message Display User’s Manual UTICOR Technology, LP 6 CHAIN MESSAGE Message Attributes [Y] A chain message will automatically display a group of other messages. The chained message contains a list of message numbers to be displayed. No message text is entered, only message numbers. Example: Message 2 is a chained message 1> 25 2> 125 3> 34 4> 9 When message 2 is selected, then messages 25, 125, 34 and 9 will automatically be displayed for a predetermined time. Each message in the chain will be displayed for the same amount of time. Refer to “System Attributes Section” for setting the chain time. All chain messages will use this time setting. The maximum number of messages in a chain is 115. Repeat Chain [Y] Will cause the list of chain messages to repeat until a new message is selected. [N] Will display the list of chain messages once. SCROLL UPWARDS [Y] Message lines will scroll up from a lower line of the display to next line up of the display. The maximum number of characters in a scroll up message is 235. Bottom Line/Top Line The message will scroll from the selected bottom line to the selected top line. The bottom line value must equal to or greater than that of the top line. Repeat [Y] The scroll up message will keep repeating until a new message is selected. [N] The scroll up message will be displayed once. Scroll Rate 79736-6 Determines the rate this particular message will scroll up. The range for scroll rate is 0.1 to 9.9 seconds. A value of 0.0 causes the PMD to use the value found in the system attributes. 39