Download MillenniumML Users Manual

Transcript
updated to reflect the change.
Note: Replacing with a fixture that has less attributes will lead to gaps in the DMX channel assignments.
Viewing Fixture Details
To open the "Fixture Details" dialog select the fixture to view using the mouse or up/down arrow keys. Then click
on or press S6 (DETAILS).
This dialog displays detailed information on the selected fixture. This includes the list of fixture parameters, the
DMX channel assignments, the control channel assignments, and the channel attributes (Type) for each fixture
parameter. Except for DMX and control channel assignments all other information comes from the library which
can be modified using an ASCII text editor.
DMX information may indicate a remote dimmer assignment. Control channel shows both virtual and standard
memory channel assignments. Virtual channels are preceded by "VC" to indicate that they are not standard
memory channels.
The channel type or attributes can be LTP (latest takes precedence), HTP (highest takes precedence), IND
(independent), and 16-bit (Coarse/Fine, MSB, LSB). MSB (most significant bits) indicates the eight (8) upper of
the 16-bit channel. LSB (least significant bits) indicates the eight (8) lower of the 16-bit channel. A channel can be
some combination of these except for LTP and HTP in which case the channel is either LTP or HTP. Typically
only the intensity channel is HTP for multi-attribute fixtures.
Fixture Patching
13-5