Download MillenniumML Users Manual

Transcript
cue linked to a macro in which a timed bump can be started when the cue is played back to start an effect. There
are three bump functions that can be entered into a macro, a normal bump button press, to bump a submaster on
regardless of it current setting, and bump a submaster off regardless of its current setting.
In the Learn mode, a bump button press on the console will be recorded to the macro. In the Macro Editor display,
a bump button press will be inserted into the current macro being edited.
To fade a submaster up regardless of its current setting, use S3 (BUMP ON) command. Press S3. Enter a
submaster number from 1-24 followed by the ENTER key. ex. [BUMP ON][2][ENTER].
To fade a submaster down regardless of its current setting, use S4 (BUMP OFF) command. Press S4. Enter a
submaster number from 1-24 followed by the ENTER key. ex. [BUMP OFF][2][ENTER].
Tip
When using the BUMP ON and BUMP OFF commands you will usually want to insert a pause between these
commands using MWAIT command. You may also want to use this feature in two macros and then link them to
two different cues. One cue might bump on an effect to run until some scene later which would then fade the
effect down.
Copying Macros
The Millennium allows you to copy keystroke sequences from one macro to another. The S7 (PASTE
MACRO) command will not only let you copy from one macro to another but because it is pasting to the current
macro you can actually insert the other macro key sequence where ever you wish or just paste to the beginning to
make an actual copy.
To make a copy of Macro 1 to Macro 5:
Select Macro 5. Press S5 followed by the number 5 and ENTER or select it in the list display using the mouse.
ex. [SELECT MACRO][5][ENTER].
Press S7 followed by the number 1 and ENTER.
ex. [PASTE MACRO][1][ENTER].
Deleting Macros
Select the macro to delete by clicking on the macro in the List Display window. The macro will be highlighted.
Click the right mouse button to display the Macro context menu. Highlight the "Delete" menu item and click with
the left mouse button. A message box will appear.
Click OK to delete the macro or click CANCEL if you do not wish to delete the macro.
From the Keyboard
To delete a macro using the keyboard, press SELECT MACRO (S5), and then enter the number of the macro to
delete. Press [ENTER]. This will select the macro.
Press DELETE (S6). The same message box will appear. Press [ENTER] to delete the macro, or to cancel, press
the right arrow key to highlight the Cancel button, then press [ENTER].
Working with Macros
17-5