Download USER`S MANUAL
Transcript
Basic Operations Call Monitor Call Monitor CALL Button Activating Call Monitor SPLIT/SW FREEZE VCR CALL ENTER MENU 1. Press the CALL button for less than three seconds to enter call-monitor select mode – a press longer than three seconds will activate the MAIN MENU. 2. The call light will blink to indicate that the MP1600/BMP1600 is in call monitor select mode. 3. Select the desired call monitor by pressing the number of the desired camera on the front panel. 4. The light will go off to indicate the completion of the call monitor selection. When the alarm inputs are enabled and triggered, their corresponding video inputs are displayed to the call monitor. In the event of multiple alarm triggers, the call monitor will switch between video inputs in one-second intervals for the duration defined in the user setup menu. 10