Download User Manual

Introduction to GNSS Studio
Installation
Introduction
- Before launching the program, don’t forget to connect the dongle to
the PC’s parallel or USB port, depending on the model of dongle you
ordered. (This dongle is part of the delivery if you have ordered a protection of the harware type.)
With an absent dongle, GNSS Studio will however run full-featured for
30 days. After this period of time, GNSS Studio will refer to the content
of the dongle to know which options are really enabled, depending on the
detail of the purchase. Obviously, if the dongle is still missing, none of
the software options will be availabe to the user at that time.
Dongles are well suited for sedentary users, especially if they wish to use
GNSS Studio on two or more office computers.
Conversely, users that travel extensively may be interested in having
software protection devices installed on their PCs rather than easily mislaid dongles. See Using a license File Rather Than a Dongle on page 7
for more information on this protection choice. Remember however that
this kind of protection cannot be moved from a PC to another as it is
closely tied to the PC hardware.
- To list the available software options after installation, launch GNSS Studio. To start GNSS Studio, from the Windows task bar, select successively Start, Programs, Thales Navigation and GNSS Studio. Once the
GNSS Studio main window is open, on the GNSS Studio menu bar,
select Help>About GNSS Studio. The dialog box that appears lists all the
possible options. Each option is followed by its current status: Yes means
the option is enabled; Yes - xx day(s) means the option is enabled for xx
days only; No means the option is disabled.
In the example below, all the options are available for use:
5