Download User Manual

References
8.4 Configuration
8.4.11 Trap destination
To open the dialog for the trap destination, you right-click on the device and
select Trap Destination.
When the dialog is opened, Industrial HiVision queries the trap settings of the
device and displays whether the device sends traps to the IP address
displayed.
… Select “Send Traps” if you want the device to send traps when defined
events occur.
… In “to IP Address” you select the IP address of your network management
station, on which you are operating Industrial HiVision.
… Select “Save Config on Device” if you want this trap configuration to be
saved locally and permanently on the device.
Figure 91: Trap destination of a device
Note: If your Windows firewall is activated and no Windows Trap Service is
installed, the firewall prevents you from receiving traps. However, if you still
want to receive traps, you add the /services/HiVisionKernelDb.exe
file in the Industrial HiVision installation directory to the firewall settings as an
executable file.
The Windows Trap Service is installed if you find “SNMP Trap Connection:
Trap Service” under ?:Kernel Info in Industrial HiVision.
Industrial HiVision
Release 04.2.00 05/2011
243