Download ISE Simulator (ISim) In-depth Tutorial

Examining the Design
♦
Use menu command Edit > Zoom > Zoom Full View or click the Zoom Full View
icon
to view the full time spectrum.
♦
You can use the horizontal and vertical sliders to view the full wave
configuration.
♦
There are assertions from the test bench during the time of simulation. Review the
Console panel for messages from the test bench. (Refer to Figure 4-15.)
X-Ref Target - Figure 1-15
Figure 4-15: Console Panel
In the next tutorial steps, you will be analyzing the simulation of the tutorial design in
more detail using features from the wave window, such as dividers, groups, cursors and
markers.
Before you continue, restart the simulation to clear the wave window and set the
simulation time to 0 picoseconds (ps).
Restarting the Simulation
To restart the simulation, either:
•
Click the Restart
•
Run menu command Simulation > Restart.
•
Type “restart” in the Tcl prompt.
icon in the menu toolbar
The wave window should look like the one shown in Figure 4-16:
X-Ref Target - Figure 1-16
Figure 4-16: Wave Window
ISE Simulator (ISim) In-Depth Tutorial
UG682 (v1.0) April 27, 2009
www.xilinx.com
31