Download emutel Symphony - Arca Technologies
Transcript
X.25 OPERATION Outgoing. TEI Value Called Party Number Pressing <Enter> can change the Terminal Endpoint Identifier. As default this value is set to “1”. When using SVCs it is necessary to send the called party number, as the call is still using the ISDN network. However, depending upon the Terminal Equipment being used, this may be called one of the following. 1. Called Party Number 2. Telephone number 3. Address Etc. Restarts Whenever an X25 call is being set up, a RESTART message must be sent. Normally the DTE will do this, however, due to a generalisation in the specification, some DTEs do not have this capability. For this reason an option has been implemented for the simulator to send a RESTART on Layer 2 establishment. APPENDIX 1 97