Download Installer manual

XL6
KBin
VBf
XL7
KBut
VVKV
Start guide
VBr
NOTE
Alt. 2
There must be water in the climate system before the switch is set to " ".
Alt. 1
P
1. Turn the heat pump's switch (SF1) to " ".
2. Follow the instructions in the start guide in the heat
pump display. If the start guide does not start when
you start the heat pump, start it manually in menu
5.7.
Stängs
Closes
XL1
XL6
Commissioning
BK
/ JK
Collector
The first time the heat pump is started a start guide is
started. The start guide instructions state what needs to
carried out at the first start together with a run through
of the heat pump’s basic settings.
XL4
The start guide ensures that the start-up is carried out
correctly and cannot be bypassed. The start guide can be
started later in menu 5.7.
XL3
XL7
XL2
Operation in the start guide
start guide 5.7
Arrows to scroll through window in start guide
1. Turn the control knob until the arrow in the top left
XL 1
XL 2
XL 3
XL 4
XL 6
XL 7
Connection, heating medium flow
Connection, heating medium return
Connection, cold water
Connection, hot water
Connection, brine in
Connection, brine out
corner (at the page number) has been marked.
2. Press the OK button to access the next step in the
start guide.
See page 39 for a more in-depth introduction to the heat
pump’s control system.
The start guide will be described under the following
points step-by-step.
Symbol key
Symbol Meaning
Shut-off valve
Safety valve
Level vessel
Expansion vessel
P
Pressure gauge
Particle filter
NIBE™ F1245
Chapter 6 | Commissioning and adjusting
27