Download PassPoint Plus Access Control System 6100

PassPoint Plus User Guide
Using this method does not allow you to enter cardholder names
for the cards. This must be done separately for each card, along
with any other specific card information you want to add.
Batch Swipe
The batch swipe method also allows you to add a batch of cards,
but this method requires you to swipe each card one by one at a
card enrollment reader.
PassPoint prompts you to choose which access group the
cardholder will belong to, and whether you want to assign a name
to each card. Then, you are prompted to swipe your cards.
Adding Cards Manually
If you don’t want to use the Card Wizard to add a cardholder to the
database, you can simply add the card manually. Adding a card
manually allows you greater flexibility, because there are many
more information fields available to you that allow you to
customize the card.
To manually add a card, follow the procedure below:
1. From the Config menu, select Cards>Add New Card or click
on the Add New Card speed button.
The Confirm dialog box appears:
2. To add cards manually, click on NO.
Managing Cards and the Cardholder Database
3–9