Download PassPoint Plus Access Control System 6100
Transcript
PassPoint Plus User Guide Access Point-Related Events Event Cause ACCPT CLEAR PREC: The precedence level of the access point has been cleared to zero. Any initiator may now control this access point. An access point’s door has been reopened during the allotted grace period. This can only occur following a valid Grant or RTErelated event An access point has been set to have hard anti-passback restrictions. Cardholders who violate the anti-passback rules will be denied access. The access points in the given access point list have been set to resume any scheduled operation. The precedence level of all the access points in the indicated Access Point list have been cleared to zero. Any initiator may now control these access points. An access point has been set to have no antipassback restrictions. ACCPT DOOR REOPENED: ACCPT HARD ANTIPASSBACK: ACCPT LIST RESUME: ACCPT LST CLEAR PREC: ACCPT NO ANTIPASSBACK: Default Can be Defaulted Contact ID Logged Priority Dialed to CS to Dial CS Code 1 Yes 1 Yes 1 Yes 1 Yes 1 Yes 1 Yes ACCPT RESUME: The access point has been set to resume any scheduled operation. 1 Yes ACCPT SOFT ANTIPASSBACK: An access point has been set to have soft anti- 1 passback restrictions. Cardholders who violate the anti-passback rules will generate a soft anti-passback violation event, but will be granted access. An access point has been set to Bypassed 1 mode. This access point no longer requires card swipes or RTE zone faults to request entry or exit. The locking mechanism is disengaged, and the door can swing freely. An Access Point list has been set to 1 Bypassed. Yes An access point has been set to Exit-Only 1 mode. The access point will only accept requests to exit through the access point either via an RTE zone or an exit reader. An Access Point list has been set to Exit1 Only. Yes BYPASS ACCESS POINT: BYPASS ACCPT LST: EXIT ONLY ACCESS POINT: EXIT ONLY ACCPT LST: Yes Yes Yes E577 Access Point Bypass Yes Yes R577 Access Point Protect Yes Yes Event Log Messages C–5