Download PassPoint Plus Access Control System 6100

PassPoint Plus User Guide
Name (Last, First, MI) - Enter the name of the cardholder in
these three fields. The name does not have to be unique, and
the manner in which the name is capitalized is not important.
Card # - Enter the card number in this field. The card number
entered will automatically compute the correct Card Code,
provided that the proper Card Technology has been chosen.
Card Technology - In this field, select the proper card
technology type that your system is using.
!
▲
This field must be filled in correctly in order for the card to
function. By default, this field reads “34 Bit ADEMCO Prox
NCC,” which is the type of card shipped with the Access Starter
Kit.
Card Code - The card code is the actual code embedded in the
card. This is the code that the system reads when the card is
presented to a reader. This field cannot be edited unless the
card technology being used is raw card image data, which is
not normally used. It updates automatically according to the
Card # entered and the Card Technology chosen in the two
previous fields.
PIN Code - In this field, enter the 8-digit personal
identification number (PIN) that you want to assign to the
cardholder.
Personal Identification Numbers can be 3 to 8 digits long. A
system option sets the PIN code length that is used throughout
the system. All PIN codes in the system must be unique to a
length of 1 digit less than the system PIN length. In other
words, if the system PIN code length is set at 4 digits, the first
3 digits of ALL of the PIN codes in the system MUST be
unique. The last PIN digit is a “don't care” — any PIN digit
can be assigned in this position. However, never define a PIN
Managing Cards and the Cardholder Database
3–11