Download Manual - MTL Instruments Group

DRAFT - 28 July 2014
6.4
Ethernet Group 3
Ethernet Group 3 are ports 19 through 26 on an 9266-ETZ8G or 25 through 32 on
an 9232-ETZ6G.These ports are 10/100 Mb and there is only one LED per port. The
triangles on thelabeling indicate which port (upper or lower) the LED belongs to. See
the image below.
10/100 Port LED Status: (reference image below)
ON Solid
Green
1000 Mb Link Only - Indicates that there is a proper 100 Mb
Ethernet connection (Link) but no communications activity
is detected.
ON Solid
Yellow
100 or 10 Mb Link Only - Indicates that there is a proper 10
Mb Ethernet connection (Link) but no communications activity
is detected.
Flashing
(either colour)
Activity - Indicates that communications activity is detected.
OFF
No link - Indicates that there is not a proper connection (Link).
Make sure the cable has been properly connected at both ends.
Ethernet Port Group 3
18
IINM9226 1 280714