Download Manual NetEye ENG_v1.0

Data
Description
Monitor Quality
Playback image quality on Remote Client virtual monitors.
100: maximum image quality.
The value affects the transmission BitRate between NetEye
and Remote Client. High image quality leads to higher band
use or saturation.
VGA
Remote Client virtual monitor resolution.
XGA
VGA: 640 x 480
XGA: 1024 x 768
To set Remote Client virtual monitors
1. Select one of the 10 virtual
monitors [1]
2. Select the number of splits for the
monitor [2]
3. Enter the number of the video
camera for each enabled split [3]
11.4 Fixed video camera settings
Purpose
The Video Camera Setup panel lets you:
• view video camera network settings
• set playback image quality and features
This panel lets you calibrate your playback image quality needs to the
real transmission band capacity,
You can set the best quality, fluidity and error control for the most
important video cameras only leaving essential image display to more
"service" video cameras so as not to saturate available band.
Streaming values are directly read by the selected video
camera.
For advanced settings see chapter 12.4 Advanced video
camera settings.
NetEye Client
In NetEye Client, the purpose of this panel is to show/change the
selected video camera IP address and index.
Path
Homepage,
, Video Camera Setup, double-click the video camera
VIDEO SURVEILLANCE SYSTEM - NETEYE MODEL
INSTALLATION AND USER MANUAL - Ver. 1.1 1-2012 ENG
PAGE 36