Download Sunny SensorBox

SMA Solar Technology AG
Mounting the Device
For mounting on a rafter you require the optional roof bracket (see section 13 "Accessories"
(page 59)).
1. Determine the installation location considering the installation space and the orientation
specified for the Sunny SensorBox (see page 18).
2. Remove the roof tiles in the installation area in order
to uncover the rafter.
3. Attach the roof bracket to the rafter by using the 5
screws and the washers.
4. Integrate the Sunny SensorBox into the existing
lightning protection.
The possibility for attaching the lightning protection is
located near the roof bracket on the lower slope.
5. Tilt the two flaps on the right and left side on the
Sunny SensorBox towards the side (see also section
10.1 "Opening the Sunny SensorBox" (page 51)).
Installation Guide
Sensorbox-IUS084413
21