Download Sunny SensorBox

SMA Solar Technology AG
Decommissioning
6. Pull the RS485-Power Injector on the right side
forward.
7. Slide the RS485-Power Injector to the left of the wall
mounting bracket.
8. Unscrew the wall mounting bracket from the wall.
☑ The RS485-Power Injector is now removed.
8.3 Removing the Sensors
When removing the ambient temperature sensor, the module temperature sensor or an
irradiation sensor and the connections in the Sunny SensorBox, irregular values for these
sensors are displayed in the Sunny WebBox.
• Remove the sensors' cables in the sequence opposite to the connection of the respective sensors.
8.4 Packaging the Sunny SensorBox and Sensors
For reshipment, use a transport-secure packaging - if possible the original packaging.
8.5 Disposing of the Sunny SensorBox and Sensors
Dispose of the Sunny SensorBox and the RS485-Power Injector at the end of their service life in
accordance with the disposal regulations for electronic waste which apply at the installation site at
that time. Alternatively, send them back to SMA America with shipping paid by the sender, and
labeled"FOR DISPOSAL".
Installation Guide
Sensorbox-IUS084413
47