Download Sunny SensorBox

SMA Solar Technology AG
Accessories
Wall Mounting
When mounting the anemometer on the wall, the mounting racket is mounted at the side end of a wall.
If the anemometer is mounted directly on the wall, turbulence may occur, which reduces
the precision of measurements. We recommend a wall-pole mounting, in order to have
more distance to the wall preventing turbulences.
1. Position the mounting bracket on the mounting
location and mark the positions of the drill holes.
2. Drill holes (diameter: 15/64“) at the marked points
and insert the screw anchors.
3. Attach the mounting bracket to the wall using 2
screws.
4. Place the anemometer with its screws into the large
cutouts of the mounting bracket.
5. Turn the anemometer in a counterclockwise
direction up to the end of the narrow cut-outs.
6. Tighten the screws below the anemometer in a
clockwise direction.
☑ The anemometer is mounted.
Installation Guide
Sensorbox-IUS084413
69