Download L-658e

Transcript
phyCORE-LPC2292/94
Caution:
When using the DB-9 socket P1B with the configuration of the
phyCORE-LPC2292/94 as described above the following jumper
settings are not functional and could damage the module:
Jumper
JP1
Setting
open
JP2
closed
JP3
closed
JP4
closed
JP5
closed
JP6
closed
JP7
closed
JP8
open
Table 55:
Description
Pin 2 of DB-9 socket P1B not connected, no
connection to TxD1 signal from
phyCORE-LPC2292/94
Pin 9 of DB-9 socket P1B connected with port P1.18
from phyCORE-LPC2292/94
Pin 7 of DB-9 socket P1B connected with port P0.22
from phyCORE-LPC2292/94
Pin 4 of DB-9 socket P1B connected with port /PCS0
from phyCORE-LPC2292/94
Pin 6 of DB-9 socket P1B connected with MOSI0
signal from phyCORE-LPC2292/94
Pin 8 of DB-9 socket P1B connected with port P0.21
from phyCORE-LPC2292/94
Pin 1 of DB-9 socket P1B connected with port P1.19
from phyCORE-LPC2292/94
Pin 3 of DB-9 socket P1B not connected, no
connection to RxD1_ext. signal from
phyCORE-LPC2292/94
Improper Jumper Settings for DB-9 Socket P1B (Second RS-232)
If an RS-232 cable is connected to P1B by mistake, the voltage level
on the RS-232 lines could destroy the phyCORE-LPC2292/94.
94
© PHYTEC Meßtechnik GmbH 2006
L-658e_5