Download OPERATING AND INSTALLATION MANUAL

12.3.1 ID Registration
1. REGISTRATION
ENTER ID NO.
->
ID: ********(**)
PW■__TS__RD_
REGISTRATION OK!
Registration allows you to add new cardholders to the Star 505R.
To add a new cardholder ID, press <ENT>.
Either present a card you wish to register to the Star 505R or
enter the card number (ID) via the keypad and press <ENT>.
NOTE: A Card Number (ID) can be 4 to 8Digits long. For
the SR505, it can be 4 to 10Digits long.
Once the Card Number is entered, enter the Password (PW),
Time Schedule (TS) and Reader Number (RD) and press <ENT>.
If the registration is successful, the “REGISTRATION OK!”
message will be displayed on the LCD. If the registration is not
successful, the “REGISTRATION ERR!” Message will be
displayed on the LCD.
Description of Fields

PW (Password): Enter the 4Digit password. Password verification can be enabled in 11.1.4.
Reader1 Mode. This field is compulsory even if you do not use password verification.

TS (Time Schedule): If you wish to apply a certain time schedule to the cardholder, enter
the T/S code. If you wish to allow the cardholder round-the-clock access, enter 0.
RD (Reader Code): To use both Reader 1 and 2 for the cardholder. Enter 0. To use just
Reader1, enter 1. To use just Reader2, enter 2.
NOTE: The TS and RD fields do not appear if the Star 505R is set in Reader Mode.

12.3.2 ID Delete
1. ID DELETE
ENTER ID NO.
->
ID Delete allows you to delete existing card numbers from the
Star 505R. To delete an existing card numbers (Or ID), press
<ENT>.
Either present a card you wish to delete to the Star 505R or
enter the card number (ID) via the keypad and press <ENT>.
47