Download The Edge Juice Module

Transcript
Edge Products, LLC
Dodge Juice/Attitude Manual
Dodge Juice Getting
Supplied Items:
1. Edge Juice Module
2. Three Wire Ties
3. Two Velcro Strips
4. Power Level Switch (if no Attitude)
5. Fuse tap.
Required Tools:
10mm Box-end wrench or socket/ratchet (to connect ground wire)
Please read these instructions completely so that you understand each step
prior to installation.
The Edge Juice Module
This picture shows the Edge Juice Module with the harness cable and Edge
Attitude Display wiring (Attitude instructions on pg. 16)
This cable is
where the
optional Edge
Attitude Display
module gets
connected.
These two
connectors
are for the
MAP sensor.
These two
connectors
are EGT
thermocouple
connections.
This is the
Data link
connector.
Figure 1.
6