Download The Edge Juice Module

Edge Products, LLC
Dodge Juice/Attitude Manual
2. Gently insert the Juice connectors between the stock connectors, and
lock in place. Gently connect the stock connectors to the other end of
the Juice connectors. The connector for injectors 1 & 2 is closest to
the Juice box, and has Red/White and Brown/White wires. The
middle injector connectors with Orange/White and Tan/White wires
goes to injectors 3 & 4, and the last injector connector ties to injectors
5 &6.
Unplug the
stock injector
connectors
Insert the
Edge Juice
injector
connectors
between the
stock
connectors
Figure 4.
Notice: Use caution when inserting connector bodies. If the connector
does not slide smoothly, remove the connector, inspect the pins, and
retry installation.
3. Next, connect the ground to the truck by removing the 10mm bolt
from the fender, above the battery. Add the black ground wire with
the round terminal to the wires already on the bolt. Replace and
tighten the bolt.
Figure 5.
8