Download The Edge Juice Module
Transcript
Edge Products, LLC Dodge Juice/Attitude Manual Dodge Juice Getting Supplied Items: 1. Edge Juice Module 2. Three Wire Ties 3. Two Velcro Strips 4. Power Level Switch (if no Attitude) 5. Fuse tap. Required Tools: 10mm Box-end wrench or socket/ratchet (to connect ground wire) Please read these instructions completely so that you understand each step prior to installation. The Edge Juice Module This picture shows the Edge Juice Module with the harness cable and Edge Attitude Display wiring (Attitude instructions on pg. 16) This cable is where the optional Edge Attitude Display module gets connected. These two connectors are for the MAP sensor. These two connectors are EGT thermocouple connections. This is the Data link connector. Figure 1. 6