Download ONE445 - OneAccess

ONE445
Chapter 4 31
Installation Guide
4.2
Interface Description
WAN Ethernet Interface Specification
•
Connector: RJ45 (EIA/TIA 568B)
•
Cable to be used: standard Ethernet cable, minimum category 5
•
Applicable standards:
-
IEEE 802.3 (10Mbps Ethernet)
-
IEEE 802.3u (100Mbps Ethernet)
•
10/100 Mbps auto-sense
•
Auto cross-over DTE/DCE (MDI/MDI-X, for connection to a terminal or switch)
•
The following LEDs are available built-in on the Ethernet connector:
Colour
Description
Green
•
OFF: link inactive.
•
ON: link active.
•
OFF: no traffic in progress.
•
ON: traffic in progress.
Yellow
The following table shows the connector layout of the RJ45 Ethernet LAN interface connector:
Pin
Signal
DTE
DCE
1
transmit (+)
Out
In
2
transmit (-)
Out
In
3
receive (+)
In
Out
4
not used
-
5
not used
-
6
receive (-)
In
7
not used
-
8
not used
-
Out
Figure