Download System Resets, Interrupts, and Operating Modes
Transcript
Basic Clock Module Operation 4.2.5 DCO Modulator The modulator mixes two DCO frequencies, fDCO and fDCO+1 to produce an intermediate effective frequency between fDCO and fDCO+1 and spread the clock energy, reducing electromagnetic interference (EMI). The modulator mixes fDCO and fDCO+1 for 32 DCOCLK clock cycles and is configured with the MODx bits. When MODx = 0 the modulator is off. The modulator mixing formula is: t =(32– MODx) × tDCO + MODx × tDCO+1 Because fDCO is lower than the effective frequency and fDCO+1 is higher than the effective frequency, the error of the effective frequency integrates to zero. It does not accumulate. The error of the effective frequency is zero every 32 DCOCLK cycles. Figure 4–8 illustrates the modulator operation. The modulator settings and DCO control are configured with software. The DCOCLK can be compared to a stable frequency of known value and adjusted with the DCOx, RSELx, and MODx bits. See http://www.ti.com/sc/msp430 for application notes and example code on configuring the DCO. Figure 4–8. Modulator Patterns MODx 31 24 16 15 5 4 3 2 Lower DCO Tap Frequency fDCO Upper DCO Tap Frequency fDCO+1 1 0 Basic Clock Module 4-9
Related documents
MSP430x1xx Family User`s Guide (Rev. F)
Extract of MSP430x1xx Family User's Guide (SLAU049E)
MSP430x2xx Family User's Guide (Rev. E
MSP430x4xx Family User's Guide (Rev. G
MSP430x4xx Family User's Guide (Rev. D)
MSP430x1xx Family User's Guide (Rev. B)
MSP430x4xx Family User's Guide (Rev. B)
Clase 5
User Manual - Hytec Electronics Ltd
User Manual - Hytec Electronics Ltd
^1 USER MANUAL ^2 Accessory 24P
USB-AO16-16A User Manual - ACCES I/O Products, Inc.