Download QCPU(A mode) CPU Module User`s Manual
Transcript
Table 6.1 Error Code List (Continue) Error Massage Detailed Error Error CPU Code Code States (D9008) (D9091) "INSTRCT CODE ERR" 107 10 Error and Cause (1) Index qualification is specified for the device numbers and set values in the OUT instruction of timers and counters. (2) Index qualification is specified at the label number of the pointer (P) provided to the head of destination of the STOP CJ , SCJ , CALL , CALLP , JMP , LEDA/B FCALL and Corrective Action Read the error step using a peripheral device and correct the program of the step. LEDA/BBREAK (Checked when STOP RUN or at execution of instruction.) 108 "PARAMET ER ERROR" 111 11 112 (Checked at power on and at STOP/ PAUSE RUN.) 113 114 instructions or at the label number of the interrupt pointer (I) provided to the head of an interrupt program. Errors other than 101 to 107 mentioned above. Capacity settings of the main and sub programs, microcomputer program, file register comments, status latch, sampling trace and extension file registers are not within the usable range of the CPU. Total of the set capacity STOP of the main and sub programs, file register comments, status latch, sampling trace and extension file registers exceeds capacity of the memory cassette. Latch range set by parameters or setting of M, L or S is incorrect. Sum check error 94 Read parameters in the CPU memory, check the contents, make necessary corrections and write them again to the memory.