Download Manual - Kikusui Electronics Corp.
Transcript
Introduction Sequence Creation Software SD013-PWX Wavy for PWX is a software application that is used to create and execute sequences on PWX Series regulated DC power supplies. This operation guide explains how to use Sequence Creation Software SD013-PWX Wavy for PWX to control PWX Series regulated DC power supplies. Applicable version This operation guide applies to version 6.x of SD013-PWX Wavy for PWX. To find out the version of the Wavy for PWX, click on the [Help] menu and select [About Wavy]. Intended readers of this operation guide This operation guide is intended for users who will use SD013-PWX Wavy for PWX to control DC power supplies and instructors of such users. It assumes that the reader has knowledge about electrical aspects of DC power supplies. Trademarks Microsoft and Windows are trademarks of Microsoft Corporation in the United States and/or other countries. All other company and product names used in this guide are trademarks or registered trademarks of their respective owners. Notations used in this guide • In this guide, SD013-PWX Wavy for PWX is referred to as ”Wavy for PWX“ or “Wavy.” PWX Series regulated DC Power Supply is referred to as the “PWX Series.” • The term “PC” means both personal computers and workstations. • The following markings are used in this guide. CAUTION Indicates a potentially hazardous situation which, if ignored, may result in damage to the product and other property. Indicates information that you should know. SD013-PWX Wavy for PWX Ver. 6.x 3