Download Q Corresponding Etherne Interface Module User`s Manual

Transcript
1 OVERVIEW
MELSEC-Q
1.2 Additional Functions in Function Version B or Later
The following table lists the functions additionally provided for the Ethernet modules of
function version B or later.
For the function version, serial No., software version of the Ethernet modules and
related products (i.e. CPU module, GX Developer) supporting the additional functions,
refer to the User’s Manual (Basic), Section 2.7.
For comparison by function versions of the Ethernet module, refer to the User’s
Manual (Basic), Appendix 1.1.
(1) Functions added for function version B
Function
When using
Overview
Sending files in CSV
Sends a file in CSV format as attachment to e-mail from the
format as attachment
Ethernet module.
Sending main text
module.
The following encoding/decoding is supported.
function
• Encode the Subject using 7 bits encoding and send it from
decoding
section
Sends main text of up to 960 words from the Ethernet
the e-mail
Support for encoding/
Reference
Chapter 2
the Ethernet module.
• Decode and receive an e-mail encoded with Quoted
Printable by the Ethernet module.
When using
the file transfer
(FTP server)
function
Remote password
check
Support for multiple
CPU systems
Unlocks/locks the remote password of the QCPU. The
unlock processing enables access to the QCPU using FTP
commands.
The QCPU transfers files to the control PLC/non-control
Chapter 5
PLC of the Ethernet module when a multiple CPU system
configuration is used.
(2) Function added for function version D
Function
Overview
Reference
section
In the following data link instructions, the target station’s
CPU type can be specified ((S1)+3). (Specification of
Specifying target station’s CPU type in
data link instructions
control/standby system or system A/B in the redundant
system is available.)
• READ/SREAD instruction
Chapter 4
Chapter 6
• WRITE/SWRITE instruction
• REQ instruction
1-4
1-4