Download Q Corresponding Etherne Interface Module User`s Manual
Transcript
1 OVERVIEW MELSEC-Q 1.2 Additional Functions in Function Version B or Later The following table lists the functions additionally provided for the Ethernet modules of function version B or later. For the function version, serial No., software version of the Ethernet modules and related products (i.e. CPU module, GX Developer) supporting the additional functions, refer to the User’s Manual (Basic), Section 2.7. For comparison by function versions of the Ethernet module, refer to the User’s Manual (Basic), Appendix 1.1. (1) Functions added for function version B Function When using Overview Sending files in CSV Sends a file in CSV format as attachment to e-mail from the format as attachment Ethernet module. Sending main text module. The following encoding/decoding is supported. function • Encode the Subject using 7 bits encoding and send it from decoding section Sends main text of up to 960 words from the Ethernet the e-mail Support for encoding/ Reference Chapter 2 the Ethernet module. • Decode and receive an e-mail encoded with Quoted Printable by the Ethernet module. When using the file transfer (FTP server) function Remote password check Support for multiple CPU systems Unlocks/locks the remote password of the QCPU. The unlock processing enables access to the QCPU using FTP commands. The QCPU transfers files to the control PLC/non-control Chapter 5 PLC of the Ethernet module when a multiple CPU system configuration is used. (2) Function added for function version D Function Overview Reference section In the following data link instructions, the target station’s CPU type can be specified ((S1)+3). (Specification of Specifying target station’s CPU type in data link instructions control/standby system or system A/B in the redundant system is available.) • READ/SREAD instruction Chapter 4 Chapter 6 • WRITE/SWRITE instruction • REQ instruction 1-4 1-4