Download TSI TrakPro Data Analysis Software User Manual
Transcript
Changing Baud Rate To change the baud rate, select Instrument Setup | Communications from the main menu and click on the required radio button in the resulting Communications Port Setup dialog box. Note Only IAQ instruments have the ability to change baud rates. The Q-TRAK™ Plus or P-TRAK™ instruments’ baud rate cannot be changed, since this is fixed at 9600. Instrument Parameters This menu option provides the sub options for applicable instruments: • Clock Setup (IAQ) • Logging Intervals (IAQ) • Time Constants (IAQ [not Q-TRAK™ Plus or P-TRAK™ instruments]) • Others (Q-TRAK™ Plus and P-TRAK™ instruments) • Analog Output (DUSTTRAK™, DUSTTRAK II™, and DUSTTRAK DRX™ monitors) • Alarm Setpoint (DUSTTRAK™, DUSTTRAK II™, and DUSTTRAK DRX™ monitors) Parameters | Clock Setup 26 TRAKPRO™ Data Analysis Software—Part Three