Download TSI TrakPro Data Analysis Software User Manual

Transcript
Changing Baud Rate
To change the baud rate, select Instrument Setup | Communications from the main menu
and click on the required radio button in the resulting Communications Port Setup dialog box.
Note
Only IAQ instruments have the ability to change baud rates. The Q-TRAK™ Plus or
P-TRAK™ instruments’ baud rate cannot be changed, since this is fixed at 9600.
Instrument Parameters
This menu option provides the sub options for applicable instruments:
•
Clock Setup (IAQ)
•
Logging Intervals (IAQ)
•
Time Constants (IAQ [not Q-TRAK™ Plus or P-TRAK™ instruments])
•
Others (Q-TRAK™ Plus and P-TRAK™ instruments)
•
Analog Output (DUSTTRAK™, DUSTTRAK II™, and DUSTTRAK DRX™ monitors)
•
Alarm Setpoint (DUSTTRAK™, DUSTTRAK II™, and DUSTTRAK DRX™ monitors)
Parameters | Clock Setup
26
TRAKPRO™ Data Analysis Software—Part Three