Download nc ops manual

PMAC NC User Manual
When the software panel is enabled, the NC will look like…
Screen 16. NC Control Screen, Software Panel Enabled
Operational Modes
Delta Tau NC operates in Manual, Auto, MDI or DNC mode.
Manual Mode
This mode is used for setting the part, which includes settings of the work offset and tool offset. The
possible axis operations include…
Axis Selection
The axis can be selected using Axis Selector switch.
Axis JOG
Axis JOG (CONT) is used to jog the selected axis. JOG+ and JOG- are possible choices.
Axis HOME
Axis HOME (Machine Reference) is used to reference the selected axis.
Axis HANDLE
Axis Handle is used for fine and controlled jog moves.
Operating Instructions for Delta Tau NC for Windows
23