Download User`s Manual

3.3.4
Control Menus
Scroll
menu
SET
Sub menu 1
Sub menu 2
Sub menu 3
Comment
Setting of output current
Set output current immediately
Set output current after “↵”
CURRENT
CURRENT delayed
MEM
Memory function
RCL
STO
Reg 0 9
Reg 0 9
MAX/MIN
Recalls one memory
Stores to a memory
Set current to one end.
0%
Set current to zero
100%
Set current to max
Control Command line
Set to Remote Control
CMD
REM
LOC
ADR
Set to Local control
Select a multidrop address
Display Interlocks / Status
Internal Interlocks
INTL
INT
SPARE INTERLOCK
DC OVERCURRENT (OCP)
DC OVERLOAD
REGULATION MODULE FAILURE
PREREGULATOR FAILURE
PHASE FAILURE
MPS WATERFLOW FAILURE
EARTH LEAKAGE FAILURE
THERMAL BREAKER / FUSES
MPS OVERTEMPERATURE
PANIC BUTTON / DOOR
SWITCH
DC OVERLOAD
EXT
May differ dependent on
customer request.
External interlocks
MAGNET WATER FLOW
FAILURE
MAGNET OVER TEMPERATURE
FIRST
STATUS
Same list as for INT
REGULATION TR. <>0",
ONE TRANSISTOR FAULT
BATTERY LOW
STATUS OF TP9=0
POLARITY SW. INHIBIT TP8=0
POL
May differ dependent on
customer request.
POS +
Change output polarity
Set polarity to +
NEG +<>-
Set polarity to Invert output polarity
LIMITS
I SET
POS
NEG
Page 24 of 54
First occurred Interlock
Status bits
Value limitations
Current value limitations
Positive limit
Negative limit