Download User`s Manual - Performance Audio
Transcript
LR-500 Quick Reference Quick Reference LR-500 Look & Listen™ Display Dots indicate the relative RF signal strength. Indicates the unit is in PROGRAM mode. To enter PROGRAM mode, press and hold the UP and DOWN keys until the PGM icon appears in the display. To exit PROGRAM mode let unit sit idle for 5 seconds. See page 16 for complete instructions. Indicates the currently tuned channel Battery level indicator. The indicator flashes, along with the red LED on top of the unit, to alert you when the battery is low and needs to be charged or changed. When the padlock is visible the unit is locked on channel currently displayed. Press and hold SEEK for 5 seconds to unlock or lock. L/O: while in Program mode, this symbol indicates that a channel is locked out and will not be available to the user. Press SEEK to toggle channels between Locked Out and non-Locked Out modes. LR-500 Battery Indicator All three segments showing: The batteries are at 50% or greater capacity. 10 Two segments showing: The batteries are at 25-49% capacity. One segment showing: Your batteries less than 25% capacity. When this segment begins flashing along with the LED on top of the unit, you should immediately change your batteries or recharge them (if using NiMH batteries).