Download User`s Manual - Performance Audio

Turn the Unit On
Receivers are turned on by rotating the volume dial counterclockwise. The red LED on top of
the unit should activate and the LCD display should illuminate. If they do not, make sure you
have installed the batteries correctly and that you are using fully charged batteries.
Select Channel(s)
See page 56 for complete channel selection
information.
Earphone/Headset jack
Red LED will illuminate
when on
LR-400 Setup Instructions
LR-400 Setup Instructions continued
Turn volume knob
counterclockwise
to turn on
Set Squelch
See pages 36 and 37 for squelch and
programming information.
LCD display will
activate when on
33