Download BA500 user manual

BA500 User Guide
Power and Energy Measurement
6. Set the logging mode to Sample or Average. When set to
Sample, then one measurement will be “picked out”. If set to
Average, then a group of measurements will be averaged with
only the average being stored in the log file
7. Set the location you want to store the data by clicking on the
“Browse” button and setting the file location (default location is
the installation directory of the RP-USB application).
8. When you are finished with the setup, press OK and you will be
back in the main screen.
7.6.2
Log Data
To log data to a file
1. To attach comments to a log of data press the Notes” button
2. This will open a Notes Dialog box
3. Type in comments and press OK. These comments will be
appended to the log that is about to commence
4. Press “Start”. The appearance of the logging section will
change to reflect that a log is in progress.
45