Download FluorChem E System User Guide

page 108
Chapter 9: Networking and Remote Access
Opening Image Files in AlphaView Software
Stored image files can be opened directly in AlphaView software for post-acquisition image analysis.
NOTES:
To open .fcz files, AlphaView Stand Alone software version 3.3 or higher must be installed on the remote
computer.
AlphaView software is only available in a Windows-compatible version.
Both .fcz and .png files can be opened in AlphaView software.
Opening .fcz Files
•
Opening files during download. Follow the instructions in the browser dialog box to download
the .fcz file. When download is complete, AlphaView software will automatically launch and open the
file.
NOTE: Some browsers may prompt for the location of the AlphaView software .exe file on the remote computer. If this occurs, select the Browse option in the browser dialog box. Browse to where AlphaView software is installed (such as Program Files\ProteinSimple\AlphaVIEW SA) and select the AIC.AlphaView.exe
file.
•
Opening saved or extracted files on the remote computer. This can be done in one of two
ways:
•
Browse to the folder where the file is located and double-click the desired .fcz file to automatically
launch AlphaView software and open the file.
• Open AlphaView software. Select File > Open. Browse to the file location and select the desired
.fcz file.
In AlphaView software, the displayed *.fcz file can be renamed and saved as a 16-bit .tif file. To do this, select
Save As from the File menu.
FluorChem E System User Guide