Download TM-C7500 Series Technical Reference Guide

LCD display
Error
Description
Recovery method
PRINTER ERROR ##
Paper jam
(##: 01 to 0A, 16 to 18,
26, 27,2A, 31 to 37
Poor autocutter operation
Irregular ambient temperature
The printer will not recover until you perform
the proper processing, then turn the power
on again.
41 to 47, 56 to 58, 62,
63, C1 to C4, C6 to C8,
D6 to DB)
Malfunction
1. Turn the power off.
2. Open the paper set cover.
3.Open the front cover.
If you cannot open the front cover, the
cutter blade may be locked. Turn this
product's power off and on again.
4. Remove all the paper that is in the paper
path.
5. Close the front cover.
6. Turn the power back on.
(If the error occurs again, request a
repair.)
7. Run auto loading of the paper.
SERVICE REQD. ##
(##: F0 to F3)
The product is beyond its
service life.
Service required
Malfunction
Request a repair.
Warning Processing
LCD display
Warning type
INK LOW
Description
Recovery method
Ink is running low.
Because it is almost time to replace the ink
cartridge, prepare an ink cartridge for
replacement. When the status changes to
“Replace ink cartridge”, replace the ink
cartridge.
Maintenance box near full
The maintenance box is
almost full.
Because it is almost time to replace the
maintenance box, prepare a maintenance
box for replacement. When the status
changes to “Replace maintenance box”,
replace the maintenance box.
NOZZLE CLOGGED
Nozzle is clogged.
Check the printing result and perform head
cleaning. Execute manual head cleaning
from [Cleaning] on the unit panel.
Ink cartridge low
M/B NEAR FULL
Print head nozzle clogged
Check the printing result, and if the nozzle
clog cannot be permitted, perform repairs.
148