Download TrafficShield Installation and Configuration Manual

Chapter 6
4. Click Export.
The File Download screen opens.
5. Click Save to open the Save As screen.
6. Select the export target folder, and click Save.
The file is saved to the disk and the Download complete screen
appears.
7. Click Close to return to the TrafficShield Application Firewall.
The file is saved with a default name:
ts_config_mm-dd-yy_hh-mm.tsc
You can modify that name before saving it.
Record traffic
The Record Traffic tool is used to record the traffic between the clients and
the TrafficShield Application Firewall, through either HTTP or HTTPS
service ports. The Record Traffic tool collects packets from interfaces 1.1 or
1.2, depending on which you are using. This output is used for support
purposes only, and is exported as part of the system configuration or copied
directly. Record Traffic uses a tcpdump utility and collects all traffic
passing through ports 80 and 443 on the TrafficShield Application Firewall.
Traffic is recorded in the following files: /ts/log/temp/rec_traffic.new and
/ts/log/temp/rec_traffic.old.
The recording filing procedure works as follows:
• The first recording is recorded in a file named rec_traffic.new.
• When the file rec_traffic.new reaches its size limit of 100MB, the file
rec_traffic.new is automatically renamed rec_traffic.old.
Further recordings are recorded in a new rec_traffic.new file.
• When the new rec_traffic.new file reaches its size limit of 100MB, it is
renamed rec_traffic.old, overwriting the old information in the old
rec_traffic.old file.
Further recordings are recorded in a new rec_traffic.new file.
6 - 28