Download "user manual"

� For your safety, please read user's manual thoroughly before operating.
� Contact the nearest authorized service facility for examination, repair, or adjustment.
� Please contact qualified service technician when you need maintenance.
Do not disassemble or repair by yourself!
Safety Instructions
� Any maintenance and inspection shall be performed by the personnel having expertise concerned.
ⓒ 2006. LS Industrial Systems Co., Ltd. All Rights Reserved.
www.lsis.biz
� HEAD OFFICE
LS Tower 1026-6, Hogye-dong, Dongan-gu, Anyang-si,
Gyeonggi-do 431-848, Korea
�Europe
�Middle East
�South West Asia
�South East Asia
�CIS
�America
+ 82-2-2034-4376
+ 82-2-2034-4901
+ 82-2-2034-4645
+ 82-2-2034-4707
+ 82-2-2034-4913
+ 82-2-2034-4377
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Specifications in this catalog are subject to change without notice due to
continuous product development and improvement.
2009. 05
� Global Network
�LS Industrial Systems (Middle East) FZE >> Dubai, U.A.E.
Address: P.O.Box-114216, API World Tower, 303B, Sheikhe Zayed Road, Dubai, U.A.E.
Tel: 971-4-332-8289 Fax: 971-4-332-9444 e-mail: [email protected]
�Dalian LS Industrial Systems Co., Ltd. >> Dalian, China
Address: No.15, Liaohexi 3-Road, Economic and Technical Development zone, Dalian
116600, China
Tel: 86-411-8273-7777 Fax: 86-411-8730-7560 e-mail: [email protected]
�LS Industrial Systems (Wuxi) Co., Ltd >> Wuxi, China
Address: 102-A, National High & New Tech Industrial Development Area, Wuxi, Jiangsu,
214028, P.R. China
Tel: 86-510-8534-6666 Fax: 86-510-522-4078 e-mail: [email protected]
�LS-VINA Industrial Systems Co., Ltd >> Hanoi, Vietnam
Address: Nguyen Khe - Dong Anh - HaNoi - VietNam
Tel: 84-4-882-0222 Fax: 84-4-882-0220 e-mail: [email protected]
�LS Industrial Systems Tokyo Office >> Tokyo, Japan
Address: 16FL, Higashi-Kan, Akasaka Twin Tower 17-22, 2-chome, Akasaka, Minato-ku
Tokyo 107-8470, Japan
Tel: 81-3-3582-9128 Fax: 81-3-3582-2667 e-mail: [email protected]
�LS Industrial Systems Shanghai Office >> Shanghai, China
Address: Room E-G, 12FL Huamin Empire Plaza, No.726, West Yan'an Road Shanghai
200050, P.R. China
Tel: 86-21-5237-9977 (609) Fax: 89-21-5237-7191 e-mail: [email protected]
�LS Industrial Systems Beijing Office >> Beijing, China
Address: B-Tower 17FL. Beijing Global Trade Center B/D. No.36, BeiSanHuanDong-Lu,
DongCheng-District, Beijing 100013, P.R. China
Tel: 86-10-5825-6025, 7 Fax: 86-10-5825-6026 e-mail: [email protected]
�LS Industrial Systems Guangzhou Office >> Guangzhou, China
Address: Room 1403,14FL, New Poly Tower, 2 Zhongshan Liu Road, Guangzhou,
P.R. China
Tel: 86-20-8326-6764 Fax: 86-20-8326-6287 e-mail: [email protected]
�LS Industrial Systems Chengdu Office >> Chengdu, China
Address: 12FL, Guodong Buiding, No.52 Jindun Road Chengdu, 610041, P.R. China
Tel: 86-28-8612-9151 Fax: 86-28-8612-9236 e-mail: [email protected]
�LS Industrial Systems Qingdao Office >> Qingdao, China
Address: 7B40, Haixin Guangchang Shenye Building B, No.9, Shandong Road Qingdao
26600, P.R. China
Tel: 86-532-8501-6568 Fax: 86-532-583-3793 e-mail: [email protected]
LS XGB (E) 2006. 06/ (07) 2009. MAY
Printed in Korea
HumanPower
Programmable Logic Controller
Automation Solution
Programmable Logic Controller
All-In-One PLC
With Next Generation Technology
XGB is the micro PLC that offers maximum automation at minimum cost.
With its high performance and functionality, it can support from simple control to complex task.
Strengthening its communication functions, XGB offers user-oriented integrated control.
Based on its strengths, it can be used in many fields of applications.
2
Contents
▶
▶
▶
▶
Feature
Main Unit
Built-in functions
Expansion
4
7
14
19
▶
DC Input
19
▶
Transistor Output
21
▶
Relay Output
23
▶
DC Input / Relay Output
24
▶
Analog Input
25
▶
Analog Output
26
▶
RTD
27
▶
Thermocouple
28
▶
Communication
▶
▶
▶
Software
Product list
Dimension
29
30
31
32
3
Feature
(Unit: mm)
It's Slim
XBM
XBC / XEC
Expansion
Item
W
H
D
DR/DN16S (16pt)
DN32S (32pt)
30
90
60
DR/DN32H (32pt)
114
90
64
DR/DN64H (64pt)
Relay output / Ethernet
180
27
90
90
64
60
Others
20
90
60
Compactness
XGB is even more compact but provides powerful functions and performance.
Compact & Powerful solutions & XGB’s steadfast competitiveness.
4
64㎜
㎜
90
60㎜
㎜
30
㎜
90
4㎜
11
High Performance
With its high-speed processing and system capability,
XGB offers utmost efficiency for your applications.
XBC /XEC (H-Type)
•83ns/Step processing speed and floating-point arithmetic with on-board CPU
•Max 10 expansion modules, Max. 384 I/O point control: PLC systems for
Small- and medium-scale applications
•Max. 5-Ch Communication with built-in functions and expansion modules
Communication
Max. 2stages
Analog Max.
10stages
Expansion I / O
Max. 10stages
Max. 10stages
XBM (S-Type)
•160ns/Step processing speed and floating-point arithmetic with on-board CPU
•Max 7 expansion modules, Max. 256 I/O point control: PLC systems for Small- and medium-scale applications
•Max. 5-Ch Communication with built-in functions and expansion modules
Communication
Max. 2stages
Analog Max.
7stages
Expansion I / O
Max. 7stages
Max. 7stages
5
Feature
Easiness &
Convenience
XGB offers convenient user interface with various network
diagnosis & monitoring functions and back-up function
•Enhanced user interface with XG5000 / XG-PD
Integrated
programming •Various monitoring functions.
environment •Network diagnosis and monitoring
•Batteryless back-up
•Powerful communication: Built-in RS-232C / 485, 2 Expansions for communication
Optimum
communication •Network configuration via Ethernet and Cnet I/F
environment
Device monitoring
User event
Frame monitoring
Forced I/O
6
Trend monitoring
Main Unit | DC power
General Specification
Programmable Logic Controller
Item
Ambient temperature
Storage temperature
Ambient humidity
Storage humidity
Vibration resistance
Shock resistance
Noise resistance
XBM-DR16S
Operating Ambience
Altitude
Pollution level *1)
Cooling
Descriptions
0 ~ 55 °C
- 25 ~ + 70 °C
5 ~ 95%RH (Non-condensing)
5 ~ 95%RH (Non-condensing)
Occasional vibration
Frequency
Acceleration
Pulse width
0.075mm
10 ≤ f < 57Hz
10 times
each
57 ≤ f ≤ 150Hz
9.8m/s2 (1G)
direction
Continuous vibration
(X, Y and Z)
Frequency
Acceleration
Pulse width
0.035mm
10 ≤ f < 57Hz
57 ≤ f ≤ 150Hz 4.9m/s2 (0.5G)
•Peak Acceleration: 147m/s2 (15g) •Duration: 11ms
•Pulse waveform: Half-sine, 3times each direction per each axis
Square wave
±500 V
impulse noise
Electrostatic
4kV
discharge
Radiated
80 ~ 1000MHz, 10V/m
electromagnetic
field noise
Main unit
Expansion module
Fast transient/
Burst noise
2kV
1kV
Free from corrosive gases and excessive dust
Up to 2,000m
Less than 2
Air-cooling
Standard
IEC61131-2
IEC61131-2
LSIS Standard
IEC61131-2
IEC61000-4-2
IEC61131-2
IEC61000-4-3
IEC61131-2
IEC61000-4-4
*1) Pollution level indicates the degree to which conductive material is generated in the environment where the equipment is used.
Pollution level 2 is the condition that only non-conductive pollution occurred but temporary conductivity may be produced due to
condensing.
Performance Specification
Item
Control method
XBM-DR16S
I/O control mode
Programming language
No. of instructions
Processing speed
Program capacity
Max. I/O points
Data memory
XBM-DN16S
XBM-DN32S
P
M
K
L
F
T
C
S
D
U
Z
N
Number of program
Operation mode
Self diagnosis
Program port
Data retension at power failure
Built-in function
Internal current consumption
Weight
Rated voltage
XBM-DN16S
XBM-DN32S
Repetitive, cyclic, interrupt, constant scan
Refresh mode (Batch processing by scan synchronization)
Direct mode by instruction
Ladder Diagram, Instruction List
Basic: 28, Applied: 677
0.16㎲ / Step (for basic instruction)
10k steps
256 points
240 points (Main + 7 expansions)
P0000 ~ P127F (2,048 points)
M0000 ~ M255F (4,096 points)
K00000 ~ K2559F (Special area: K2600 ~ 2559F) (40,960 points)
L00000 ~ L1279F (20,480 points)
F000 ~ F255F (4,096 points)
100ms, 10ms, 1ms: T000 ~ T255 (Changeable by Parameter setting)
C000 ~ C255
S00.00 ~ S127.99
D0000 ~ D5119 (5,120 words)
U00.00 ~ U07.31 (Analog data refresh area: 256 words)
Z000 ~ Z127 (128 words)
N0000 ~ N3935 (3,936 words)
128
RUN, STOP, DEBUG
Operation delay monitoring, memory error, I/O error, etc.
RS-232C
Latch range setting at Basic parameter
RS-232C/485, High-speed counter, PID control, Pulse catch, Input filter
External interrupt, Positioning *1)
400mA
250mA
280mA
140g
100g
110g
DC24V
*1) XBM-DR16S doesn’t have built-in positioning function.
7
Main Unit | DC power
Names and Functions
❶
❷
Input LED
❹
❺
❻
❽
❾
❿
❷
Condition LED
Descritpions
Input indication
Red On: Input signal On
Red Off: Input signal Off
PWR: Power indication
Red On: Power On
Red Off: Power Off
RUN: RUN indication
Green On: PLC Run
Green Off: PLC Stop
ERR: Error indication
Red On-and-Off: PLC Error
Red Off: PLC Normal condition
Remark
❸
Output LED
Output LED
On: Output signal On
Off: Output signal Off
❹
Expansion module
connector
Expansion module
connector
Connection of expansion module
(I/O, Special function, Communication)
❺
❻
PADT connector
Mode switch
PADT connection
Mode setting
Connector for XG5000 / XG-PD connection
Setting Run / Stop mode of PLC
❼
Input connector
/ Terminal block
Input wiring connection
-
❽
Output connector
/ Terminal block
Ouput wiring connection
-
❾
❿
Built-in RS-485 connector
Built-in RS-232C connector
Power connector
Built- in RS-485 connection
Built-in RS-232C connection
Power supply connection
Input specification
Item
Input point
Rated input voltage
Rated input current
Operation voltage range
Off → On
Response time
On → Off
Common Method
Relay output specification
Item
Output point
Insulation method
Rated load voltage / current
Min. load voltage / current
Max. load voltage
Off leakage current
Max. On / Off frequency
Mechanical
Service life
Electrical
Off → On
On → Off
Common method
Response time
8
Descriptions
❸
❶
❼
Name
No.
RS-485 + /-terminal connection
RS-232C T×D, R×D, SG terminal connection
DC 24V power supply
XBM-DR16S
XBM-DN16S
XBM-DN32S
8 points
8 points
16 points
DC24 V
4mA (00 ~ 03: 7mA)
DC20.4 ~ 28.8V (ripple rate < 5%)
1 / 3 / 5 / 10 / 20 / 70 / 100ms
(set by CPU parameter) Default: 3ms
8 points / COM
16 points / COM
XBM-DR16S
8 points
Relay insulation
DC 24V 2A (Resistive load) / AC 220V 2A (COSØ = 1), 5A / COM
DC 5V / 1mA
AC 250V, DC 125V
0.1mA (AC 220V, 60Hz)
3,600 times / hr
20millions times or more
Rated load voltage / current 100,000 times or more
AC 200V / 1.5A, AC 240V / 1A (COSØ = 0.7) 100,000 times or more
AC 200V / 1A, AC 240V / 0.5A (COSØ = 0.35) 100,000 times or more
DC 24V / 1A, DC 100V / 0.1A (L / R = 7ms) 100,000 times or more
10ms or less
12ms or less
8 points / COM
Programmable Logic Controller
Transistor output specification
Item
XBM-DN16S
XBM-DN32S
8 point
16 point
Photo coupler insulation
DC 12/24V
DC 10.2 ~ 26.4 V
0.2A / 1 point (P 20 ~ 23: 0.1A / Point)
4A / 10ms or less
DC 0.4V or less
1ms or less
1ms or less (Rated load, resistive load)
8 point / COM
16 point / COM
Output point
Insulation method
Rated load voltage
Load voltage range
Max. load voltage
Max. inrush current
Max. voltage drop (On)
Off → On
Response time
On → Off
Common method
Extenal power Voltage
supply
Current
External connection method
DC 12 / 24V ±10% (ripple voltage 4 Vp-p or less)
25mA or less (DC 24V connection)
20pin connector
Wiring (XBM-DR16S)
XBM-DR16S
8-point DC input
8-point Relay output
wiring (XBM-DN16S / DN32S)
Connection cable
Terminal board
Terminal board
Connection cable
XBM-DN16S
XBM-DN32S
SLT-CT051-XBM
●
SLT-CT101-XBM
●
SLP-T40P
Remark
1. Cable length
CT051: 0.5m
CT101: 1.0m
2. Board type
T40P: Terminal board
RY4A: Relay board
9
Main Unit | AC or DC power
General Specification
Item
Descriptions
Standard
0 ~ 55 °C
- 25 ~ + 70 °C
5 ~ 95%RH (Non-condensing)
5 ~ 95%RH (Non-condensing)
Ocnasional vibration
Frequency
Acceleration Pulse width
0.075mm
10 ≤ f < 57Hz
10 times
each
Vibration resistance 57 ≤ f ≤ 150Hz 9.8m/s2 (1G)
IEC61131-2
direction
Continuous vibration
(X,
Y
and
Z)
Frequency
Acceleration Pulse width
0.035mm
10 ≤ f < 57Hz
57 ≤ f ≤ 150Hz 4.9m/s2 (0.5G)
•Peak Acceleration: 147m/s2 (15g) •Duration: 11ms
Shock resistance
IEC61131-2
•Pulse waveform: Half-sine, 3times each direction per each axis
Square wave impulse noise
±1,500 V
LSIS Standard
Electrostatic discharge
IEC61131-2 / IEC61000-4-2
4kV
Radiated
80 ~ 1000 MHz, 10V/m
Noise resistance
IEC61131-2 / IEC61000-4-3
lectromagnetic field noise
Main unit Expansion module
Fast transient/ Burst noise
IEC61131-2 / IEC61000-4-4
2kV
1kV
Operating Ambience
Free from corrosive gases and excessive dust
Altitude
Up to 2,000m
Pollution level *1)
Less than 2
Cooling
Air-cooling
Ambient temperature
Storage temperature
Ambient humidity
Storage humidity
XBC-DR32H
XBC-DN32H
XBC-DR32H/DC
XBC-DN32H/DC
XEC-DR32H
XEC-DN32H
*1) Pollution level indicates the degree to which conductive material is generated in the environment where the equipment is used. Pollution
level 2 is the condition that only non-conductive pollution occurred but temporary conductivity may be produced due to condensing.
Performance Specification
XBC-DR64H
XBC-DN64H
XBC-DR64H/DC
XBC-DN64H/DC
XEC-DR64H
XEC-DN64H
XBC-DN64H
XBC-DN32H
XBC-DR64H
XEC-DN64H*1)
XEC-DN32H*1)
XEC-DR64H*1)
XBC-DN64H/DC
XBC-DN32H/DC
XBC-DR64H/DC
Repetitive, cyclic, interrupt, constant scan
Control method
Refresh mode (Batch processing by scan synchronization)
I/O control mode
Direct mode by instruction
Programming language
Ladder diagram or IEC standard (LD, SFC, ST)*1)
Processing speed
83ns / Step (for basic instruction)
Program capacity
15k step (IEC type 200KB)
Max. I/O points
352 points(Main + 10 expansions)
384 points (Main + 10 expansions)
128
Number of program
Operation mode
RUN, STOP, DEBUG
Operation delay monitoring, memory error, I/O error, battery error, power error, etc.
Self diagnosis
USB (Rev 1.1), RS-232C
Program port
Latch range setting at Basic parameter
Data retension at power failure
RS-232C / 485, High-speed counter, PID control, Pulse catch, Input filter
Built-in function
External interrupt, Positioning
Built-in
RTC
660mA
260mA
1040mA
330mA
Internal current consumption
600g
500g
900g
800g
Weight
AC 100 ~ 240V or DC24V
Rated voltage
Data memory
XEC(IEC type)
XBC
Symbolic variablearea (A) 32KB (Max.16K byte retain setting available)
P P0000 ~ P1023F (16,384 points)
Input variable (I)
M M0000 ~ M1023F (16,384 points)
2KB (%IX15.15.63)
Output variable (Q)
K K0000 ~ K4095F(Special area: K2600~2559F) (65,536 points)
2KB (%QX15.15.63)
M 16KB (Max.8K byte retain setting available)
L L00000 ~ L2047F (32,768 points)
Direct variable
20KB (1block)
R
F F000 ~ F1023F (16,384 points)
W
T 100ms, 10ms, 1ms: T000 ~ T1023(Changeable by Parameter setting)
20KB
2KB
C C000 ~ C1023
F
S S00.00 ~ S127.99
K
8KB
Flag variable
D D0000 ~ D10239 (10,240 word)
L
4KB
U U00.00 ~ U0A.31 (Analog data refresh area: 352)
N
10KB
U
Z Z000 ~ Z127 (128 word)
1KB
20KB, 2blocks (Using R device)
N N0000 ~ N5119 (5,120 word)
Flash area
Item
XBC-DR32H
XEC-DR32H*1)
XBC-DR32H/DC
*1) Only main unit for IEC standard language
10
Programmable Logic Controller
Names and Functions
❾
❿
❼
Name
No.
❶
❶ Input LED
❽
❸
XBC-DR64H
XBC-DN64H
Remark
Red On: Input signal On
Red Off: Input signal Off
Red On: Power On
Red Off: Power Off
Green On: PLC Run
Green Off: PLC Stop
PWR: Power indication
RUN: RUN indication
❷ Condition LED
❷
Descritpions
Input indication
❹
❺
❻
Descriptions
ERR: Error indication
Red On-and-Off: PLC Error
Red Off: PLC Normal condition
❸ Output LED
Output LED
On: Output signal On
Off: Output signal Off
❹ Expansion module
connector
❺ PADT connector
❻ Mode switch
❼ Input Terminal block
❽ Output Terminal block
❾ Built-in RS-485 connector
❿ Built-in RS-232C connector
Power terminal
Expansion module
connector
Connection of expansion module
(I/O, Special function, Communication)
PADT connection
Mode setting
Input wiring connection
Ouput wiring connection
Built-in RS-485 connection
Built-in RS-232C connection
Power supply terminal
Connector for XG5000 / XG-PD connection
Setting Run/Stop mode of PLC
RS-485 + /-terminal connection
RS-232C T×D, R×D, SG terminal connection
AC 110-220V power supply
Input Specification
XBC-DR32H
XEC-DR32H
Item
Input points
Rated input voltage
Rated input current
Operation voltage range
On voltage / On current
Off voltage / Off current
Input resistance
Response time
Off → On
On → Off
Weight
Relay output specification
XBC-DN32H
XEC-DN32H
Item
Service life
Response time
Electrical
Off → On
On → Off
Common method
XBC-DN64H
XEC-DN64H
16 points
32 points
DC 24V
4mA (Contact 0~7: 9mA)
DC 20.4 ~ 28.8V (Ripple rate < 5%)
DC 19V or more / 3mA or more
DC 6V or less / 1mA or less
5.6kΩ(P00 ~ P07: 2.7kΩ)
1 / 3 / 5 / 10 / 20 / 70 / 100 ms (Setting by CPU parameter) Initial value: 3ms
600g
Output point
Insulation method
Rated load voltage / current
Min. load voltage / current
Max. load voltage
Off leakage current
Max. On / Off frequency
Mechanical
XBC-DR64H
XEC-DR64H
500g
900g
800g
XBC-DR32H/XEC-DR32H
XBC-DR64H/XEC-DR64H
16 points
32 points
Relay insulation
DC 24V 2A (Resistive load) / AC 220V 2A (COSØ = 1), 5A / COM
DC 5V / 1mA
AC 250V, DC 125V
0.1mA (AC 220V, 60Hz)
3,600 times / hr
20millions times or more
Rated load voltage / current 100,000 times or more
AC 200V / 1.5A, AC 240V / 1A (COSØ = 0.7) 100,000 times or more
AC 200V / 1A, AC 240V / 0.5A (COSØ = 0.35) 100,000 times or more
DC 24V / 1A, DC 100V / 0.1A (L / R = 7ms) 100,000 times or more
10ms or less
12ms or less
4 points / COM
P20 ~ 2F: 4 points / COM
P30 ~ 3F: 8 points / COM
11
Main Unit | AC power
Transistor output specification
Item
Output point
Insulation method
Rated load voltage
Load voltage range
Max. load voltage
Off leakage current
Max. inrush current
Max. voltage drop (On)
Surge absorber
Off → On
Response time
On → Off
XBC-DN32H/XEC-DN32H
XBC-DN64H/XEC-DN64H
16 points
32 points
Photo coupler insulation
DC 12 / 24V
DC 10.2 ~ 26.4 V
0.5A / 1point (P 20 ~ 23: 0.1A / point)
0.1mA or less
4A / 10ms or less
DC 0.4V or less
Zener Diode
1ms or less
1ms or less (Rated load, resistive load)
P20 ~ 2F: 4 points / COM
4 points / com
P30 ~ 3F: 8 points / COM
DC 12 / 24V ± 10% (ripple voltage 4 Vp-p or less)
10mA or less (DC 24V connection)
Common method
External power
supply
Voltage
Current
Input wiring
(XBC-DR32H / XBC-DN32H
XEC-DR32H / XEC-DN32H)
RX
TX
SG
485+ 485-
P01
P03
P02
P00
P05
P04
P07
P06
P09
P08
P0B
P0A
P0D
P0F
24G
POC POE COM
24V
Input wiring
(XBC-DR64H / XBC-DN64H
XEC-DR64H / XEC-DN64H)
RX
TX SG P01 P03 P05 P07 P09 P0B P0D POF NC P11 P13 P15 P17 P19 P1B P1D P1F 24G
485+ 485- P00 P02 P04 P06 P08 P0A P0C P0E COM0 P10 P12 P14 P16 P18 P1A P1C P1E COM1 24V
Relay output wiring
(XBC-DR32H/XEC-DR32H)
AC100 ~
240V
FG
12
P20
NC
P22 COMO P25
P21
P23
P24
P27
P28 P2A COM2 P2D P2F
P26 COM1 P29
P2B P2C
P2E COM3
Programmable Logic Controller
Transistor output Wiring
(XBC-DN32H/XEC-DN32H)
AC100 ~
240V
FG
P20
P
P21
P22 COMO P25
P23
P24
P27
P28
P26 COM1 P29
P2A COM2 P2D
P2B
P2C
P2F
P2E COM3
Relay output Wiring
(XBC-DR64H/XEC-DR64H)
AC100
240V
P20 P22 COM0 P25 P27 P28 P2A COM2 P2D P2F P30 P32 P34 P36 COM4 P39 P3B P3D P3F
FG
NC P21 P23 P24 P26 COM1 P29 P2B P2C P2E COM3 P31 P33 P35 P37 P38 P3A P3C P3E COM5
Transistor output wiring
(XBC-DN64H/XEC-DN64H)
AC100 ~
P20 P22 COM0 P25 P27 P28 P2A COM2 P2D P2F P30 P32 P34 P36 COM4 P39 P3B P3D P3F
240V
FG
P
P21 P23 P24 P26 COM1 P29 P2B P2C P2E COM3 P31 P33 P35 P37 P38 P3A P3C P3E COM5
13
Built-in functions | High-speed counter
Terminal (XBM)
1-Phase
Terminal
number
Encoder
Signal name
CH0 counter input
CH1 counter input
CH2 counter input
CH3 counter input
Ch0 preset 24V
Ch1 preset 24V
Ch2 preset 24V
Ch3 preset 24V
Input COMMON
000
001
002
003
004
005
006
007
COM0
2-Phase
Description
Counter input
Counter input
Counter input
Counter input
Preset input
Preset input
Preset input
Preset input
COMMON
Signal name
Ch0 A-phase input
Ch0 B-phase input
Ch2 A-phase input
Ch2 B-phase input
Ch0 preset 24V
Ch2 preset 24V
Input COMMON
Description
A-phase input
B-phase input
A-phase input
B-phase input
preset input
preset input
COMMON
High-speed counter
One phase:4Ch,20kpps
Two phase :2Ch,10kpps
Terminal (XBC/XEC)
High-speed counter
One phase: 100kpps 4ch, 20kpps 4ch
Two phase: 50kpps 2ch, 10kpps 2ch
Terminal
number(XBC)
P000
P001
P002
P003
P004
P005
P006
P007
P008
P009
P00A
P00B
P00C
P00D
P00E
P00F
COM0
1-Phase
Signal name
CH0 counter input
CH1 counter input
CH2 counter input
CH3 counter input
CH4 counter input
CH5 counter input
CH6 counter input
CH7 counter input
Ch0 preset 24V
Ch1 preset 24V
Ch2 preset 24V
Ch3 preset 24V
Ch4 preset 24V
Ch5 preset 24V
Ch6 preset 24V
Ch7 preset 24V
Input COMMON
2-Phase
Description
Counter input
Counter input
Counter input
Counter input
Counter input
Counter input
Counter input
Counter input
Preset input
Preset input
Preset input
Preset input
Preset input
Preset input
Preset input
Preset input
COMMON
Signal name
Ch0 A-phase input
Ch0 B-phase input
Ch2 A-phase input
Ch2 B-phase input
Ch4 A-phase input
Ch4 B-phase input
Ch6 A-phase input
Ch6 B-phase input
Ch0 preset 24V
Ch2 preset 24V
Ch4 preset 24V
Ch6 preset 24V
Input COMMON
Description
A-phase input
B-phase input
A-phase input
B-phase input
A-phase input
B-phase input
A-phase input
B-phase input
preset input
preset input
preset input
preset input
COMMON
Wiring
Voltage output encoder
14
Open collector encoder
Programmable Logic Controller
Performance Specification
Item
Count input
signal
Signal
Input type
Signal level
Max. counting speed
Number of channels
Counting range
Count mode
(Program setting)
Input mode
(Program setting)
Signal type
1 phase input
Up/Down
setting
2 phase input
CW/CCW
1 phase input
Multiplication
function
2 phase input
Control input
CW/CCW
Signal
Signal level
Signal type
Output points
External
output
Input Specification
Description
A-phase, B-phase
Voltage input (Open collector)
24V
XBM: One phase: 20kpps 4ch
Two phase: 10kpps 2ch
XBC: One phase: 100kpps 4ch, 20kpps 4ch
Two phase: 50kpps 2ch, 10kpps 2ch
XBM: 4 channels (In case of 2-phase, 2 channels available)
XBC: 8 channels (In case of 2-phase, 4 channels available)
Signed 32 Bit (-2,147,483,648 ~ 2,147,483,647)
Linear count (if 32-bit range exceeded, Carry/Borrow occurs)
Ring count (repeated count within setting range)
1-phase input
2-phase input
CW/CCW input
Voltage
Increasing/Decreasing operation setting by B-phase input
Increasing/Decreasing operation setting by program
Automatic setting by difference in phase
A-phase input: increasing operation
B-phase input: decreasing operation
1 multiplication
4 multiplication
1 multiplication
Preset instruction input
DC 24V input type
Voltage
1 point/channel (for each channel): terminal output available (XBC: 2points)
Type
Select single-compared (>, >=, =, =<, <) or section compared
output (included or excluded) (program setting)
Output type
Relay, Open-collector output (Sink)
Count Enable
To be set through program
(count available only in enable status)
Preset function
Auxiliary mode
To be set through terminal (contact) or program
Count latch
Item
Input voltage
Input current
On voltage (min.)
Off voltage (max.)
Description
24V DC (20.4V ~ 28.8V)
4mA
20.4V
6V
15
Built-in functions | Positioning
Terminal (XBM)
Pin layout
Item
Pin number
Pulse
Pulse output (Open collector)
Direction Pulse output (Open collector)
Output
DC 24V
External 24V power supply
A9/A10
Output
COM
External 24V GND
B9/B10
Limit L
A1
A3
Low limit
Limit H
A2
A4
High limit
DOG
A5
A7
Near point
Zero
A6
A8
Zero
signal (+24V)
Input
Input
COM
Common
A9/A10, B9/B10
Servo/Stepping drive
Servo/Stepping motor
Positioning
Max.2channels,100kpps
Terminal (XBC/ XEC)
Pin layout
Item
Pin number(XBC)
X axis
P0008
P0009
P000C
Input
P000D
Y axis
P000A
P000B
P000E
P000F
Signal name
Limit L
Low limit
Limit H
High limit
DOG
Near point
Origin
Zero signal (+24V)
Input COM
Common
COM
Pulse Pulse/CW (Open collector)
P0020 P0021
Output P0022 P0023 Direction Direction/CCW (Open collector)
DC12V External power supply
P
Output COM External 24V GND
COMO
Servo/Stepping drive
Servo/Stepping motor
Positioning
Max.2channels,100kpps
Performance Specification
Item
Edge
Edge
Edge
Edge
-
→
→
→
→
←
←
←
←
←
Direction of positioning Operating
signal to external condition
←
←
←
←
←
→
→
→
→
7.4mA
24/V
DC5~24V
Description
No. of control axis
Interpolation
2 axes
2-axis linear interpolation
Control mode
Position control, Speed control, Speed/Position switching control,
Position/speed switching control
Control unit
Pulse
Positioning data
30-step pattern for each axis (XBC: 80step)
(operation step number : 1 ～ 30, XBC : 1~80)
Positioning monitor
Dedicated monitoring function for positioning in XG5000
Permanent Backup of downloaded parameter (FLASH memory)
2-month Super Cap.Backup of parameter/data modified during operation(XBM)Battery back-up (XBC)
Permanent Backup of parameter/data in RAM by instruction (FLASH memory)
Absolute / incremental method
-2,147,483,648 ～ 2,147,483,647
1 ～ 100,000 (pulse/sec)
Back-up
Positioning method
Positioning range
Speed range
Positioning Acceleration /
Deceleration type
Acceleration /
Deceleration time
Max. output pulse
Max. distance of connection
16
Direction of positioning Operating
condition
signal to external
Signal name
X axis Y axis
A1
A2
A3
A4
Trapezoidal acceleration / deceleration
1 ～ 10,000㎳ (4 patterns each can be set)
100 Kpps
2m
Programmable Logic Controller
Electrical specification
Signal
Rated input Load voltage
Max. load
Max. voltage Leakage
Response
voltage
range
current/inrush current drop (On) current (Off)
time
Output
Output pulse
Signal
Input
Wiring
DC 5~24V
DC
4.75~26.4V
Rated input Load voltage
voltage/current
range
External high limit
DC 24V/7mA
External low limit
Approximate zero
DC 24V/4mA
zero
DC 20.4 ~
28.8V
100mA(1 point)
1A/10ms or less
DC 0.3V or
less
0.1mA or
less
100㎲ or less
On
voltage/current
Off
voltage/current
Input
resistance
Response
time
DC 19V/5.7mA
or more
DC 6V/1.8mA
or less
3.3Ω
DC 19V/3.4mA
or more
DC 6V/1.1mA
or less
5.6Ω
0.5ms or less
Wiring with DC 5V
Wiring with DC 24V
17
Built-in functions | PID/Pulse catch/Input filter/Task
Performance Specification
(PID)
Item
No. of control loop
Control mode
Control period
Forward/Reverse
Mixed control
Function
Pulse catch
Description
16-loop independent control
P control, PI control, PD control, PID control
10ms ~ 6,563.5ms (Setting unit: 0.1ms)
Switching control direction automatically when exceeding dead band
Cascade
SV Ramp
Improved control precision by serial connection between Master loop and Slave loop
Preventing overload caused by excessive SV change by setting variation slope
Alarm
Improved control stability with various alarm function such as MV high limit/low limit,
PV high limit/low limit, PV variation width
Auto tuning
Additional function
Auto tuning with improved auto-tuning algorithm
PWM output, PV Tracking, ▵MV, ▵PV, etc
When the On-condition time of input signal (P0000~P0007) is shorter than 1 scan time (Min. 50㎲), Pulse catch
processes the input signal as normal input.
External input signal
Input image data
Item
No. of setting points
Min. pulse width
Input filter
XBM
8 points: P000 ~ P007
50㎲
XBC
4 points: P000 ~ P003
10㎲
4 points: P004 ~ P007
50㎲
Input filter prevents processing of the input signal that is shorter than the filtering time. (Filtering time is set by
parameter) In the application site where noise is frequently generated, input filter prevents wrong input caused by noise.
External input signal
Input image data
Item
No. of setting points
Input filtering time setting
Setting range
Task
Description
Every input contact
Assigning for each module
1 ~ 100㎳ (1,3,5,10,20,70,100)
Task function is the processing method of internal/external signal generated preriodically or aperiodically.
(Total 24 task can be assigned.) It stops operation of scan program for the moment and then execute the
assigned task.
Types of Task
1. Initialization task setting
Running a task one time before INIT_DONE
at initial execution
2. Fixed-cycle task setting
Item
No. of setting points
Setting range
Description
8 points
1~42,94,967,295ms
3. External points task setting
XBM
XBC
Item
No. of setting points P000 ~ P007 P000 ~ P003 P004 ~ P007
Min. pulse width
50㎲
10㎲
50㎲
Up, Down, Change
Condition
18
4. Internal device task setting
Item
No. of setting points
Condition
Description
8 points
Up, Down, Change, On, Off
Expansion | DC Input
Programmable Logic Controller
Specification
Model
Specification
Input point
XBE-DC08A
8 points
Rated input voltage / current
XBE-DC32A
16 points
32 points
DC 24V / 4mA
Operation voltage range
DC 20.4 ~ 28.8V (Ripple rate < 5%)
Input resistance
Response time
XBE-DC16A
5.6kΩ
Off → On
On → Off
Insulation pressure
1 / 3 / 5 / 10 / 20 / 70 / 100ms (setting by CPU parameter) Initial value: 3ms
AC 560Vrms / 3 Cycle (altitude 2000m)
Insulation resistance
10MΩor more by megger
COMMON method
Internal current consumption
8 points / COM
16 points / COM
32 points / COM
30mA
40mA
50mA
XBE-DC08A
XBE-DC16A
XBE-DC32A
Wiring (XBE-DC08A / DC16A)
8-point DC input
16-point DC input
XBE-DC08A
XBE-DC16A
19
Expansion | DC Input
Wiring (XBE-DC32A)
PLC
Smart Link
Pin number
B20
B19
B18
B17
B16
B15
B14
B13
B12
B11
B10
B09
B08
B07
B06
B05
B04
B03
B02
B01
Input wiring with Smart Link
(XBE-DC32A)
20
Terminal number
XBE-DC32A
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A09
A08
A07
A06
A05
A04
A03
A02
A01
SLP-T40P
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
NC
NC
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
NC
NC
COM
COM
A1
B1
A2
B2
A3
B3
A4
B4
A5
B5
A6
B6
A7
B7
A8
B8
A9
B9
A10
B10
A11
B11
A12
B12
A13
B13
A14
B14
A15
B15
A16
B16
A17
B17
A18
B18
A19
B19
A20
B20
Expansion | Transistor Output
Specification
Model
Specification
Programmable Logic Controller
XBE-TN08A XBE-TP08A XBE-TN16A XBE-TP16A XBE-TN32A XBE-TP32A
Sink
Type
Source
8 point
Output point
DC 10.2 ~ 26.4 V
DC 0.4V
Off → On
1mA or less
On → Off
Common method
Internal current consumption
Voltage
External
Power supply
0.2A / 1point, 2A / COM
0.1mA or less
Max. voltage drop (On)
Response time
Source
32 point
Load voltage range
0.2A / 1point
Sink
16 point
DC 12 / 24V
Off leakage current
Wiring (XBE-TN08A / TN16A)
Source
Rated load voltage
Max. load current
XBE-TN08A
XBE-TN16A
XBE-TN32A
Sink
Current
1mA or less (Rated load, resistive load)
8 points / COM
16 points / COM
32 points / COM
40mA
60mA
120mA
DC 12 / 24V ± 10% (Ripple voltage ≤ 4 Vp-p)
20mA or less
10mA or less (DC 24V connection)
(DC 24V connection)
8-point sink Output
16-point sink Output
XBE-TN08A
XBE-TN16A
21
Expansion | Transistor Output
Wiring (XBE-TN32A)
PLC
Smart Link
Pin number
B20
B19
B18
B17
B16
B15
B14
B13
B12
B11
B10
B09
B08
B07
B06
B05
B04
B03
B02
B01
SLP-T40P Output wiring
(XBE-TN32A)
Terminal number
SLP-RY4A Output wiring
(XBE-TN32A)
Terminal number
22
XBE-DC32A
A20
A19
A18
A17
A16
A15
A14
A13
A12
A11
A10
A09
A08
A07
A06
A05
A04
A03
A02
A01
SLP-T40P
00
01
02
03
04
05
06
07
08
09
0A
0B
0C
0D
0E
0F
NC
NC
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
NC
NC
DC 12 / 24V
COM
A1
B1
A2
B2
A3
B3
A4
B4
A5
B5
A6
B6
A7
B7
A8
B8
A9
B9
A10
B10
A11
B11
A12
B12
A13
B13
A14
B14
A15
B15
A16
B16
A17
B17
A18
B18
A19
B19
A20
B20
Expansion | Relay Output
Specification
Model
Specification
Output point
Insulation method
Rated input voltage / current
Min. load voltage / current
Max. load voltage
Off leakage current
Max. on / off frequency
Surge absorber
Mechanical
Service life
Response time
XBE-RY08A
XBE-RY16A
Wiring (XBE-RY08A / RY16A)
Programmable Logic Controller
Electrical
Off → On
On → Off
COMMON method
Internal current consumption
Operation indicator
External connection method
XBE-RY08A
XBE-RY16A
8 points
16 points
Relay insulation
DC 24V 2A (resisitive load) / AC 220V 2A (COSΨ = 1), 5A /COM
DC5V 1mA
AC 250V, DC 125V
0.1mA (AC 220V, 60Hz)
3,600 times / hr
None
20million times or more
Rated load voltage / current 100,000 times or more
AC 200V / 1.5A, AC 240V / 1A (COSΨ = 0.7) 100,000 times or more
AC 200V / 1A, AC 240V / 0.5 (COSΨ = 0.35) 100,000 tiems or more
DC 24V / 1A, DC 100V / 0.1A (L / R = 7ms) 100,000 times or more
10ms or less
12ms or less
8 points / 1COM
230mA
420mA
Output On, LED On
9-pin terminal block connector
9-pin terminal block connector × 2
8-point Relay Output
16-point Relay Output
XBE-RY08A
XBE-RY16A
23
Expansion | DC Input / Relay output
DC Input Specification
Model
Specification
Input point
Insulation method
Rated input voltage
Rated input current
Operation voltage range
On voltage / On current
Off voltage / Off current
Input resistance
Off → On
Response time
On → Off
COMMON method
Weight
DC Input (XBE-DR16A)
8 points
Photo coupler
DC24V
4mA
DC20.4 ~ 28.8V (Ripple rate < 5%)
DC19V or more / 3mA or more
DC6V or less / 1mA or less
5.6kΩ
1 / 3 / 5 / 10 / 20 / 70 / 100ms (setting by CPU parameter) init value: 3ms
8 points / COM
81g
XBE-DR16A
Relay Output Specification
Model
Specification
Output point
Insulation method
Rated input voltage / current
Min. load voltage / current
Max. load volfage
Off leakage current
Max. on / off frequency
Surge absorber
Mechanlcal
Service life
Response time
Electrical
Off → On
On → Off
COMMON method
Internal current consumption
Operation indicator
External connection method
Relay output (XBE-DR16A)
8 points
Relay insulation
DC 24V 2A (resisitive load) / AC 220V 2A (COSΨ = 1), 5A /COM
DC5V 1mA
AC 250V, DC 125V
0.1mA (AC 220V, 60Hz)
3,600 times / hr
None
20million times or more
Rated load voltage / current 100,000 times or more
AC 200V / 1.5A, AC 240V / 1A (COSΨ = 0.7) 100,000 times or more
AC 200V / 1A, AC 240V / 0.5 (COSΨ = 0.35) 100,000 tiems or more
DC 24V / 1A, DC 100V / 0.1A (L / R = 7ms) 100,000 times or more
10ms or less
12ms or less
8 points / 1COM
250mA
Output On, LED On
9-pin terminal block connector
Wiring (XBE-DR16A)
8-point DC input
24
8-point Relay Output
Expansion | Analog Input
Specification
Item
Analog range selection
❷
Digital data
❸
Resolution
❹
Names and Functions
Max. conversion speed
Max. absolute input
Accuracy
Analog Input channels
Insulation method
Connection terminal
Occupied I/O points
DC 5V
Current
consumption
DC 24V
No.
XG5000 I/O Parameter
Analog range
0 ~ 10V
4 ~ 20mA
0 ~ 20mA
Unsigned value
0 ~ 4000
Signed value
-2000 ~ 2000
Precise value
0 ~ 1000
400 ~ 2000
0 ~ 2000
Percentile value
0 ~ 1000
Data format of digital output is set by user program or I/O parameter
(Setting for each channel is available.)
Resolution
Resolution
Analog input
Analog input
(1 / 4000)
(1 / 4000)
4 ~ 20mA
2.5mV
0 ~ 10V
5.0㎂
0 ~ 20mA
1.5ms / channel
±15V
±25mA
±0.5% or less
4 channel / module
Photocoupler insulation between I/O terminal and power supply
11-point terminal block
Fixed type: 64 points
120mA
62mA
Name
Descriptions
❸ Terminal block
▶ Indicates condition of module
•LED On: Normal condition
•LED On and Off: Error
•LED Off: Power Off or module malfunction
▶ Voltage / Current selection switch
•V: Voltage input selection
•I: Current input selection
▶ External device connection
❹ External power
supply terminal
▶ External DC 24V input
❶ RUN LED
❷ Input selection S/W
Wiring
XBF-AD04A
DC 0 ~ 10 V (input resistance: 1MΩ min.)
DC 4 ~ 20mA, DC 0 ~ 20mA (input resistance 250Ω)
Analog range
❶
XBF-AD04A
Programmable Logic Controller
Wiring with 2-wire sensor
Wiring with 4-wire sensor
※Use 22AWG, 2 conductor, twist shielded cable when wiring between analog module and
external device.
25
Expansion | Analog Output
Specification
Item
Analog range
❶
Analog range Selection
Output range
Unsigned value
Signed value
Digital data Precise value
Percentile value
Data format
Resolution
❷
❸
XBF-DV04A
XBF-DC04A
Names and Functions
Max. conversion speed
Max. absolute output
Accuracy
Analog output channels
Insulation method
Connection terminal
Occupied I/O points
DC 5V
Current
consumption
DC 24V
XBF-DV04A
DC 0 ~ 10 V
4 ~ 20mA / 0 ~ 20mA
(Load resistance ≥ 2kΩ)
(Load resistance ≤510Ω)
XG 5000 I/O parameter
0 ~ 10 V
4 ~ 20mA / 0 ~ 20mA
0 ~ 4000
0 ~ 4000
- 2000 ~ 2000
- 2000 ~ 2000
0 ~ 1000
400 ~ 2000 / 0 ~ 2000
0 ~ 1000
0 ~ 1000
Data format of digital input is set by user program or I/O parameter
(Setting for each channel is available.)
Resolution (1 / 4000)
2.5mV
5㎂
1ms / channel
±15V
±25mA
±0.5% or less
4 channel / module
Photocoupler insulation between I/O terminal and power supply
11-point terminal block
Fixed type: 64 points
110mA
110mA
70mA
120mA
Name
No.
XBF-DC04A
Descriptions
❷ Terminal block
▶ Indicates condition of module
•LED On: Normal condition
•LED On and Off: Error
•LED Off: Power Off or module malfunction
▶ External device connection
❸ External power
supply terminal
▶ External DC 24V input
❶ RUN LED
Wiring
2kΩ or more
XBFDV04A
26
2kΩ or more
510Ω or less
XBFDC04A
510Ω or less
Expansion | Analog Input/Analog Output
Programmable Logic Controller
Specification
XBF-AH04A
Item
❶
❷
❽
Analog channel
Analog range
❸
❹
Analog range Selection
Unsigned value
Signed value
Digital data
Precise value
❺
Percentile value
Resolution(1/4000)
❻
❼
XBF-AH04A
Names and Functions
Max. conversion speed
Max. absolute output
Accuracy
Insulation method
Connection terminal
Occupied I/O points
Current
DC 5V
consumption
DC 24V
No.
❷ OUTPUT LED
❸ Input selection S/W
❹ Output selection S/W
❻
Terminal block
❼ External power supply terminal
❽ Expansion connector
Wiring
Output
2 channels
2 channels
DC 1 ~ 5V, DC 0 ~ 5V, DC 0 ~ 10V
(Input resistance: 1 MΩmin.)
DC 1 ~ 5V, DC 0 ~ 5V, DC 0 ~ 10V
(Load resistance ≥ 2kΩ)
DC 4 ~ 20mA, DC 0 ~ 20mA
(Input resistance 250Ω)
DC 4 ~ 20mA, DC 0 ~ 20mA
(Load resistance ≤510Ω)
XG 5000 I/O parameter and External switch
0 ~ 4000
-2000 ~ 2000
100 ~ 500 (DC 1 ~ 5V), 0 ~ 500 (DC 0 ~ 5V), 0 ~ 1000 (DC 0 ~ 10V)
400 ~ 2000 (DC 4 ~ 20mA), 0 ~ 2000 (DC 0 ~ 20mA)
0 ~ 1000
1.25mV (DC 1~5V, 0~5V), 2.5mV (DC 0~10V)
5 (DC4~20mA, 0~20mA)
±15V, 25mA
1ms / channel
±0.5% or less
Photocoupler insulation between I/O terminal and power supply
11-point terminal block
Fixed type: 64 points
120mA
130mA
Name
❶ INPUT LED
❺
Input
Descriptions
▶ Indicates input condition of module
•LED On: Normal condition
•LED On and Off: Error
•LED Off: Power Off or module malfunction
▶ Indicates output condition of module
•LED On: Normal condition
•LED On and Off: Error
•LED Off: Power Off or module malfunction
▶ Voltage / Current selection switch for input
▶ Voltage / Current selection switch for output
▶ Terminal for external input device
▶ Terminal for external output device
▶ Terminal for external DC 24V input
▶ Terminal for expansion
Wiring with 2-wire sensor (for analog input)
Wiring with 4-wire sensor (for analog input)
※Use 22AWG, 2 conductor, twist shielded cable when wiring between analog module and
external device.
27
Expansion | RTD
Specification
❶
❷
❺
❸
Item
Number of channels
PT 100
Sensor
Type
JPT 100
PT 100
Temperature
range
JPT 100
PT 100
Digital
JPT 100
output
Scaling
25℃
Accuracy
0 ~ 55℃
Conversion speed
Wiring method
DC 5V
Current
consumption
DC 24V
XBF-RD04A
4
JIS C1804-1997
JIS C1604-1981, KS C1603-1991
- 200 ~ 600℃
- 200 ~ 600℃
- 2000 ~ 6000
- 2000 ~ 6000
0 ~ 4000
±0.3% or less
±0.5% or less
40ms / Ch
3Wire
100mA
100mA
❹
XBF-RD04A
Names and Functions
No.
Name
❶
RUN LED
❷
ALM LED
❸
❹
❺
Terminal block
External power terminal
Expansion connector
Descriptions
▶ Displays the hardware operation status (Fatal fault)
•On: Normal status
•Flickering: Error (0.2s flickering)
•Off: hardware error or power off
▶ Displays the status of the channels (Light fault)
•Flickering: Line disconnection (1s flickering)
•Off: Normal status
▶ 3-wire RTD sensors can be connected
▶ Supplies the external DC 24V
▶ Connects the module with an expansion module
Wiring
Terminal
2 Wire
28
Terminal
3 Wire
Terminal
4 Wire
Expansion | Thermocouple
Specification
Programmable Logic Controller
Item
Number of channels
❶
❷
Input sensor type
K
J
T
R
Temperature
display unit
Digital output
Scaling display
(Defined by user)
Normal temperature (25℃)
Accuracy
Temperature coneffcient (0 ~ 55℃)
Max. conversion speed
Warming-up time
Terminal
I/O points occupied
DC 5V
Current
consumption
DC 24V
Temperature
Input range
❺
❻
❸
❹
XBF-TC04S
4
Thermocouple K / J / T / R
JIS C1602-1995
- 200.0℃ ~ 1300.0℃ (-328.0℉ ~ 2372.0℉)
- 200.0℃ ~ 1200.0℃ (-328.0℉ ~ 2192.0℉)
- 200.0℃ ~ 400.0℃ (-328.0℉ ~ 752.0℉)
0.0℃ ~ 1700.0℃ (32.0℉ ~ 3092.0℉)
Display down to one decimal place
K, J, T: 0.1℃ R: 0.5℃
Unsigned scaling (0 ~ 65535)
Signed scaling (-32768 ~ 32767)
±0.2%
±100 ppm / ℃
50ms / Channel
15 minutes or more
11-point terminal
64 points
100mA
100mA
XBF-TC04S
Names and Functions
No.
Name
❶
RUN LED
❷
ALM LED
❸
❹
❺
❻
Terminal block
External power terminal
Expansion connector
RJC
Descriptions
▶ Displays the hardware operation status (Fatal fault)
•On: Normal status
•Flickering: Error (0.2s flickering)
•Off: hardware error or power off
▶ Displays the status of the channels (Light fault)
•Flickering: Line disconnection (1s flickering)
•Off: Normal status
▶ Terminals to connect the thermo-couple sensor
▶ Terminals to supply the external DC 24V
▶ Terminal to connect the expansion modules
▶ Device for reference junction compensation
Wiring
Module
Compensation
cable
Terminals
Shield
cable
Sensor
29
Expansion | Communication
Ethernet (XBL-EMTA)
Item
Communication spec.
Protocol
With LS PLCs
With other devices
Service
Application
XBL-EMTA
HS link sending / receiving data
10 / 100 Base-TX
TCP / IP, UDP / IP
High-speed link, P2P service
P2P service
Dedicated protocol service, XG5000 service
200words / block (Max.64blocks)
No. of channel connectable
to upper stage
6 channels
Service
Communication with PC (HMI) and external devices,
High-speed communication among LSIS PLCs
Media
Current consumption
UTP / STP Category 5
300mA
XBL-EMTA
RS-232C, RS-422 / 485
Item
Interface
MODEM Function
Dedicate
XG5000 mode
Mode
P2P
Operation Server (slave)
Mode
Client (master)
Start Bit
Data Bit
Data format Stop Bit
Parity
Setting
XBL-C21A
XBL-C41A
30
Synchronous
Speed (bps)
Station number
Distance
MODEM communication
Network
Diagnostic
Max. expansion
Built-in RS-232C
XBL-C21A
Built-in RS-485
XBL-C41A
RS-232C 1Ch
RS-232C 1Ch
RS-485 1Ch
RS-422 / 485 1Ch
Remote communication via the external MODEM (XBL-C21A Only)
1:1 or 1:N via the dedicated protocol
Program download, upload and control via the remote control
Communication defined by the protocol using XG-PD XGT / Modbus master
XGT / Modbus Server, User-defined communication
XGT / Modbus P2P Master, User-defined communication
1
7 or 8
1 or 2
Even / Odd / None
Setting by XG-PD parameter
Asynchronous
1,200 / 2,400 / 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps
Setting by XG-PD, Max. 32 stations
RS-232C: Max.15m (Expansion by MODEM), RS-422/485: Max 500m
Support
1: 1
Via LED and XG-PD
Built-in
1: N
2 stages
Built-in
2 stages
Software
XG5000
(Programming software)
Programmable Logic Controller
•Program editing & Engineering software
•Windows-based easy operation
•Multi-PLC, Multi-programming support
•Various monitoring and diagnosis functions
•Windows 2000, XP (Limited use in Windows 98, ME)
Variable Monitor
Ladder Monitor
Forced I/O
Trend Monitor
XG -PD
(Network setting software)
Special Module Monitor
•Convenient network setting
•Extended monitoring funchion for network system and communication modules
•Fast interface with CPU by effective network management
•Various bult-in diagnosis, functions
(CPU condition, Link conditon, Service condition, Frame monitoring)
Parameter setting
Network Scan
Link Monitoring
Fast Ethernet
XGT Panel
Cnet
Other PLC
Smart I/O
LS Inverter
Frame Monitoring
Other net
devics
Service Condition
Monitoring
31
Product list
Product list
Item
Model
Specification
XBM-DR16S
XBM-DN16S
XBM-DN32S
XBC-DR32H
XBC-DN32H
XBC-DR64H
XBC-DN64H
Main unit
XBC-DR32H/DC
XBC-DN32H/DC
XBC-DR64H/DC
XBC-DN64H/DC
XEC-DR32H
XEC-DN32H
XEC-DR64H
XEC-DN64H
XBE-DC08A
XBE-DC16A
XBE-DC32A
XBE-RY08A
XBE-RY16A
XBE-TN08A
Expansion
I/O module
XBE-TN16A
XBE-TN32A
XBE-TP08A
XBE-TP16A
XBE-TP32A
XBE-DR16A
XBF-AD04A
XBF-AH04A
XBF-DV04A
Special module
XBF-DC04A
XBF-RD04A
XBF-TC04S
XBL-C41A
Communication
XBL-C21A
module
XBL-EMTA
PMC-310S
Loader Cable
USB-301A
Memory module XBO-M1024A
Terminal
board
Connection
cable
SLT-CT051-XBM
SLT-CT101-XBM
SLT-CT051-XBE
SLP-T40P SLT-CT101-XBE
SLT-CT151-XBE
SLT-CT201-XBE
SLT-CT301-XBE
SLP-CT051-XBE
SLP-CT101-XBE
SLP-RY4A SLP-CT151-XBE
SLP-CT201-XBE
SLP-CT301-XBE
32
DC24V power supply, 8-point DC24V input, 8-point relay output
DC24V power supply, 8-point DC24V input, 8-point TR output, Built-in positioning function
DC24V power supply, 16-point DC24V input, 16-point TR output, Built-in positioning function
AC110~220V, 16-point DC input, 16-point Relay output
AC110~220V, 16-point DC input, 16-point TR output
AC110~220V, 32-point DC input, 32-point Relay output
AC110~220V, 32-point DC input, 32-point TR output
DC24V, 16-point DC input, 16-point Relay output
DC24V, 16-point DC input, 16-point TR output
DC24V, 32-point DC input, 32-point Relay output
DC24V, 32-point DC input, 32-point TR output
AC110~220V, 16-point DC input, 16-point Relay output (IEC standard language)
AC110~220V, 16-point DC input, 16-point TR output (IEC standard language)
AC110~220V, 32-point DC input, 32-point Relay output (IEC standard language)
AC110~220V, 32-point DC input, 32-point TR output (IEC standard language)
8-point DC24V input
16-point DC24V input
32-point DC24V input
8-point relay output
16-point relay output
8-point Transistor (sink) output
16-point Transistor (sink) output
32-point Transistor (sink) output
8-point Transistor (source) output
16-point Transistor (source) output
32-point Transistor (source) output
8-point DC24V input, 8-point relay output
4-channel analog input (current/voltage)
2-channel analog input (current/voltage)/2-channel analog output (current/voltage)
4-channel analog output (voltage)
4-channel analog output (current)
4-channel RTD input
4-channel Thermocouple input
Cnet (RS-422/485) I/F
Cnet (RS-232C) I/F
Ethernet I/F
Connection cable (PC to PLC), 9pin (PC)-6pin (PLC), Soft tube type cable
Connection cable (PC to PLC), USB
External memory for program back-up (1024kbyte)
XBM-DN16S
XBM-DN32S
XBE-DC32A
XBE-TN32A
XBE-TP32A
●
●
-
●
●
●
●
●
-
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
-
Remark
1. Cable length
CT051: 0.5m
CT101: 1.0m
CT151: 1.5m
CT201: 2.0m
CT301: 3.0m
2. Board Type
T40P: Terminal
board
RY4A: Relay
board
Dimension
Programmable Logic Controller
Download cable diagram
Dimension
90
60
64
90
100
30
64
W
(Unit: mm)
Item
Model
W
XBC-DR32H/DN32H
XEC-DR32H/DN32H
Item
XBM
XBC/XEC
Common
Length
Model
Main unit
DR/DN32H (32pt)
DR/DN64H (64pt)
RY output / EMTA
DC input
TR output
Analog
114
Item
Model
Length
W
XBC-DR64H/DN64H
XEC-DR64H/DN64H
180
W
H
D
30
114
180
27
90
90
90
90
60
64
64
60
20
90
60
33
MEMO
34
MEMO
Programmable Logic Controller
35