Download nativeKONTROL apC

SETTINGS
If you have trouble completing any of the settings listed here, please make
sure to refer to the Troubleshooting section.
REASON/RECORD SETTINGS
The following settings will be found in Preferences on the Keyboards and
Control Surfaces page.
1.
2.
3.
4.
5.
Click Add.
Select Mackie as the Manufacturer.
Select Control as the Model.
Select From MT Player 1 as the Input.
Select To MT Player 1 as the Output.
6. Click Add.
7. Select <Other> as the Manufacturer.
8. Select MIDI Control Keyboard as the
Model.
9. Select From MT Player 2 as the Input.
MT PLAYER SETTINGS
The first time you use the APC40 in MT Player, you will need to setup the
APC40’s ports. You are prompted to do this as soon as a Preset is selected
in MT Player. However, if you bypass those prompts, you can access the
settings by right-clicking on MT Player and selecting MIDI Settings.
1.
2.
3.
4.
5.
6.
From the Port Name menu, select “IN: APC40 Input”.
From the MIDI In port menu, select your APC40 and click OK.
Go back into MIDI Settings.
From the Port Name menu, select “OUT: APC40 Output”.
From the MIDI Out port menu, select your APC40 and click OK.
Click the Restart button.
This Preset also includes an Input for a 2nd MIDI controller, which is used
for Learn Mode. To setup the 2nd controller:
1. From the Port Name menu, select “IN: Keyboard(ForLearn)”.
2. From the MIDI In port menu, select your 2nd controller and click OK.
You can learn more about MT Player in the MT Player section.
1