Download nativeKONTROL apC

GLOBAL CONTROLS
The following controls are global meaning they’re the same in every Mode.
UNDO/REDO – Undo/redo. The
LEDs will light up if an Undo/Redo
is available.
UNMUTE ALL – Unmute all
tracks in the sequencer. If any track
is muted, the LED will be lit.
UNSOLO ALL – Unsolo all tracks
in the sequencer. If any track is
soloed, the LED will be lit.
SHIFT – Shifts the function of
other controls. Shifted functions are
shown in Red this manual.
TRACK UP/DOWN – Move
between tracks in the sequencer.
CH LEFT/RIGHT and
PREV/NEXT BANK – These
function differently depending on
which device is selected.
MUTE TRACK/SOLO TRACK – Mute/Solo the currently selected track.
PREV/NEXT PATCH – If the selected device has patches, these Buttons
will let you navigate them.
NAV/DRUM/SCALE/CHORD/LEARN MODE – These Buttons select
the function of the Clip Launch/Stop Buttons.
SHOW NAME – This will cause the name of the selected device to scroll
across the APC’s Clip Launch section. Please note, when a device is
selected, it takes about 2 seconds for the name to be retrieved. The Show
Name function will do nothing until the name has been retrieved.
FLIP – This will flip the function of the Encoders and Faders so that the
Faders control what the Encoders would normally control and vice versa.
2