Download MOLAND-LIGHT

Transcript
Type of information
Type of model
Application
Spatial resolution
Temporal resolution
Description
Constrained cellular automata, simulation.
All cells.
Depending on the application case (from 50 to 1000 meter)
Year.
Process description
In MOLAND-LIGHT applications, the whole modelling area is represented as a mosaic of
grid cells, each occupied with a specific land use. All cells together constitute the land use
pattern of the study area.
In principle, it is the relative attractiveness of a cell as viewed by a particular spatial agent, as
well as the local constraints and opportunities that cause cells to change from one type of land
use to another. Changes in land use at the local level are driven by four important factors (see
Figure below):
•
•
•
•
Physical suitability, represented by one map per land use vacant and land use
function modelled. The term suitability is used here to describe the degree to which a
cell is fit to support a particular land use function and the associated economic or
residential activity for a particular activity. Suitability maps are constructed based on
physical characteristics of the location. Suitability maps remain constant during the
simulation for land use vacants and land use functions unless new suitability maps for
specific times are imported. The static suitability maps are described in the Suitability
the section of this chapter.
Zoning or institutional suitability, represented by one map per land use function
modelled. Zoning maps are used for enforcing spatial restrictions on the allocation of
land uses. For each land use there is a time-series of zoning maps, specifying which
cells can and cannot be taken in by the particular land use allowing changing zoning
regulations over periods of time. The model allows for 3 time-periods, which can be
changed by the user. Zoning maps remain constant during the simulation unless the
user changes them.
Accessibility, represented by one map per land use function modelled. Accessibility
is an expression of the ease with which an activity can fulfil its needs for
transportation and other infrastructure in a particular cell based on the infrastructure
network. The accessibility is calculated per land use function and only changes if the
user changes the zonal accessibility parameters in the transport model or the
infrastructure network or the accessibility coefficients (the importance of different
land use functions to be close to different elements of the network) in the land use
model.
Dynamic interaction of land uses in the area immediately surrounding a location is
represented by the Neighbourhood potential. For each land use function, a set of
spatial interaction rules determines the degree to which it is attracted to, or repelled
by, the other functions present in its surroundings; a 196 cell neighbourhood. If the
attractiveness is high enough, the function will try to occupy the location, if not, it
will look for more attractive places. New activities and land uses invading a
neighbourhood over time will thus change its attractiveness for activities already
present and others searching for space. This process constitutes the highly non-linear
character of this model.
On the basis of these four elements, the model calculates for every simulation step the
transition potential for each cell and function. In the course of time and until regional
demands (provided by the user or calculated in the regional model) are satisfied, cells will
change to the land use function for which they have the highest transition potential.
Consequently, the transition potentials reflect the pressures exerted on the land and thus
44